TZM5235F-GS18

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes are semiconductor devices that allow electrical current to flow in only one direction. The TZM5235F-GS18 is a single Zener diode, an active semiconductor device that reduces the voltage across its terminals. It is used in a variety of applications.

Applications of the TZM5235F-GS18 include:

• Regulator Circuits: The Zener diode is used in voltage regulator circuits to limit the amount of voltage across the circuit, thus providing consistent power supply levels.
• Surge Protection: A Zener diode can be used to protect circuits from high voltage surges and spikes. It reduces the voltage of the circuit to a safe level when the voltage spike is detected.
• Transient Suppression: The diode can also be used to reduce high frequency transients in a circuit. It acts like a steady state capacitor to absorb the energy of the high frequency pulse.
• Clipping: The Zener diode is also used to clip the voltage of a signal. It is used to limit the voltage at some specified value, thereby preserving the signal integrity.
• Reverse Polarity Protection: The diode can be used in reverse bias to protect circuits from incorrect polarity. It stops the current flow when the desired polarity is not achieved.

Working Principle

The TZM5235F-GS18 is a single Zener diode that has a Zener voltage of 18 volts. The device is mainly used for regulating and protecting circuits from overvoltage. It is usually connected in reverse bias and the voltage on the diode must be less than the Zener voltage for proper operation.

When connected in reverse bias, the Zener diode acts like an electrical resistance that has a nearly constant voltage drop across it. This voltage drop is the Zener voltage of the diode. This means that when the voltage across the diode is greater than the Zener voltage, the current through the diode is limited and the voltage across the diode is maintained at the Zener voltage.

The Zener diode is used to regulate the voltage of the circuit in which it is connected. The diode prevents the voltage across it from exceeding the Zener voltage by limiting the current through it. When the voltage across the diode exceeds the Zener voltage, the current is reduced and the voltage is maintained at the Zener voltage.

The device is also used in transient suppression. The Zener diode absorbs the energy of the high frequency pulse and dissipates it as heat. This effectively reduces the affect of the transient on the circuit.

The diode can also be used as a voltage clipper. It clips off the voltage of a signal at a specified value, thereby preserving the signal integrity. The Zener diode can also be used as a reverse polarity protection. When the polarity of a circuit is reversed, the diode stops the current flow.

The TZM5235F-GS18 is a single Zener diode that is used for a variety of applications. It is used to regulate the voltage of a circuit, suppress transients, clip voltage, and protect circuits from reverse polarity. The Zener voltage of the device is 18 volts.

The specific data is subject to PDF, and the above content is for reference