TZM5257B-GS18

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

TZM5257B-GS18 is a Zener diode that is typically used in regulating and clamping circuits, voltage limiting and switching applications. It is especially suited for high-efficiency and low-voltage operation. This device is a high power, single diode packaged in the SOT25 package.

The device consists of a dielectric body with two contacts, an anode and a cathode, connected inside it. The anode is usually connected to the positive voltage source and the cathode is connected to the negative voltage source. This diode can be used to regulate or limit the current or voltage of the connected sources.

The TZM5257B-GS18 can be used in a variety of circuits and applications. It can be used as a voltage regulator to provide a constant output voltage in systems that require a wide dynamic range of input voltages. This device can also be used for clamping and limiting the voltage in pulsed systems. Other applications include use as an ESD protection device, and as a reverse bias diode for low-voltage RF, DC, and AC applications. The device also performs well in high-frequency switching applications.

The working principle of the TZM5257B-GS18 is relatively simple. In a circuit connected to the diode, the voltage at each end of the diode is equal and the current through the diode is determined by the voltage. The current is limited by the P-N junction breakdown voltage, and therefore, the current through the diode is limited by the voltage. In an AC circuit, the current is alternately stopped and allowed to flow through the diode depending on the voltage at each end of the diode. The direction of the current flow is also determined by the voltage.

The junction breakdown voltage is also dependent on the temperature and ambient conditions of the device. Therefore, it is important to correctly determine and control the temperature of the circuit when using the TZM5257B-GS18 for optimal performance. Additionally, the device must be properly matched with the components and circuitry of the circuit to ensure optimal performance.

The TZM5257B-GS18 provides a cost-effective solution for voltage regulating and clamping in digital and analog systems. It provides a stable output voltage with low leakage current and can also be used for ESD protection in high-impedance digital circuits. This device is well-suited for use in low-voltage AC, DC and RF applications, making it an invaluable component for modern electronic systems.

The specific data is subject to PDF, and the above content is for reference