TZM5266F-GS08

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The TZM5266F-GS08 is a single Zener diode, a general-purpose diode specifically designed to efficiently convert alternating current (AC) into direct current (DC). It also acts as a voltage regulator, protecting sensitive electronics circuitry against surges and short-circuits. Single Zener diodes are commonly used in automotive circuitry, computer power supplies, communication gadgets and other devices with electrical components.

TZM5266F-GS08 has the following specifications:

• Voltage Ratings: 2, 4.3, 5.1 and 6.2 Volts
• Power Rating: 500 mW
• Reverse Leakage Current: 2㏁
• Maximum Zener Impedance: 7.2Ω
• Power Temperature Coefficient: 80 ppm/°C

The TZM5266F-GS08 Zener single diode is an ideal choice for applications where low current (2 mA), low voltage (6.2 V) and a strong temperature coefficient are requisites. Thanks to its small package size (SSOT-6), it can be used in high density designs and use minimal PCB area.

As any other semiconductor device, TZM5266F-GS08 also has its limitations, such as maximum reverse voltage, power dissipation and temperature coefficient. Exceeding these limits might cause irreversible damage to the device. The use of proper ESD (electrostatic discharge) protection is essential, as well as the use of thermal management techniques to reduce the risk of thermal runaway.

The working principle of the TZM5266F-GS08 Zener single diode is based on its construction. When the anode is connected to a positive DC source, the electrons from the anode travel to the cathode, through the PN junction. As electrons cross the junction, some of them combine with the atomic lattice, resulting in the formation of an electric field. This field prevents further electrons from crossing the junction, making a diode. The electric voltage placed across the diode determines the current flow: if the voltage is below the breakdown voltage, the current flow is negligible; if the voltage is above the Zener breakdown voltage, the current will flow in a reverse direction.

In the case of the TZM5266F-GS08, the Zener voltage is 6.2 volts. To use it, a positive DC voltage is applied to the anode and connected to the cathode. When the 6.2-volt limit is exceeded, the current starts flowing in a reverse direction, through the diode, and the resulting output voltage is regulated to the 6.2 volts. This is its regulator effect, making it an ideal option for low current applications, such as powering low-voltage circuits.

In conclusion, the TZM5266F-GS08 Zener single diode is used in myriad applications, ranging from automotive to communication gadgets. Thanks to its small package size, it is suitable for high density designs. By the same token, the device can withstand up to 6.2 volts and 500 mW, without experiencing any major damages. Its regulator effect allows for efficient conversion of AC to DC and provides protection against surges and short-circuits.

The specific data is subject to PDF, and the above content is for reference