U18J3V6QE2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Rocker switches are used in a variety of applications, from consumer electronics to industrial settings. The U18J3V6QE2 rocker switch is a multi-pole single-throw switch designed for power control applications in the 24 VDC range. It features an integrated strain relief guide that helps ensure correct wire bending and routing for increased safety and reliability. The switch is UL listed, CE certified, and RoHS compliant.

The U18J3V6QE2 rocker switch is typically used in machinery, robotics, robotics control, audio/video equipment, test equipment, emergency systems, telecommunications, and other applications. The switch is typically mounted into a 0.5" hole and held together with the included mounting clip. The switch can be used to control with a single-pole double-throw circuit switching action. It has an actuator that can move in two directions, one of which is actuated when the switch is triggered.

The U18J3V6QE2 rocker switch has a rated voltage of 24 VDC and is rated for 80 cents, or 0.8mA for a no-load current application. A normally-closed operation is standard, with a normally-open operation available upon request. The switch features a low-profile housing and a neutral actuator position to ensure good environmental protection. It also features a long-life contact system that is designed to last for up to 10,000 rotations.

In terms of its working principle, the U18J3V6QE2 rocker switch needs an electrical signal that is sent to an internal relay. This relay then triggers the actuation of the switch, which in turn sends a pulse to the current that needs to be controlled. The signal can either be an on/off state, an open/close state, or a signal that corresponds to the desired action of the switch. This signal is then directed to the power supply, where it is converted into a current that can be used to control the device.

In conclusion, the U18J3V6QE2 rocker switch is a useful device for power control applications in the 24 VDC range. The switch is designed for simple two-position single-throw circuitry switching. The switch features a UL-listed and CE-certified design with a long-life contact system and neutral actuator position for good environmental protection. It also has an integrated strain relief guide for increased safety and reliability.

The specific data is subject to PDF, and the above content is for reference