UA24DC-6

Series:	*
Part Status:	Active

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

< html>UA24DC-6 is an application field tool and its working principle is as following:UA24DC-6 is a differential amplifier in which the input is applied to both the differential input and common-mode input ports. This allows for the measurement of input signals both in voltage and current. It is a tool for measuring low noise signals by using a differential amplifier.The differential amplifier employs the common-mode rejection method to reduce the noise of the incoming signal. This is achieved by subtracting the common-mode input from the differential input. This would result in a signal that has a much smaller noise ratio than the same signal applied directly to an input.The input signals are applied to the differential and common-mode inputs separately while the output is taken from the sum of the differential and common-mode inputs. The more the amount of common-mode input, the more the amount of the input signal follows the common-mode input.In the differential amplifier, the amplifier circuit is based on an operational amplifier and is configured as an inverting amplifier. The input signal is applied to the inverting input of the operational amplifier and the output is taken at the noninverting input.This means that the output signal will always be in opposite polarity to the input. The amount of inversion can be controlled by the application of a resistor and capacitor between the inputs.The differentiator is used to amplify the common-mode signal produced by the input signal. This makes the input signals much more linear and accurate, allowing for the accurate measurement of input signals.The UA24DC-6 also incorporates caliper capability, allowing the user to measure the distance between two voltage inputs. With a high speed clock generator, the UA24DC-6 is able to achieve a high update rate for faster measurements.Overall, the UA24DC-6 is a tool for measuring low noise signals using a differential amplifier. Its caliper capability and high update rate make it well suited for many applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description