UAF42APG4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The UAF42APG4 is an active filter based on an input voltage range of 5 volts DC (Vdd) and 5 volts DC (Vee). The output frequency range of the UAF42APG4 is between 0 and 2.5 MHz. The UAF42APG4 includes two operational amplifier circuits, one for high pass filtering, and the other for low pass filtering.

Transistors and resistors are used to implement the 6 pole Chebyshev filters. When the transistors are active, they act as current sources and sinks, which change the gain of the amplifier at various frequencies. This gives the UAF42APG4 its unique ability to provide a controlled amount of gain and decrease at all frequencies greater than the passband.

One application for the UAF42APG4 is for filtering analog signals for high speed digital communication systems such as cellular phones, Wi-Fi and other wireless systems. The UAF42APG4\'s active filtering is used to reduce interference from other wireless systems and increase data throughput. It can also be used to reduce unwanted signals, such as noise from a television or audio system.

The UAF42APG4 can also be used for protection against high frequencies and transient spikes. The active filter has a fast settling time and is able to quickly reduce large instantaneous signals. The UAF42APG4 can also provide filtering for RF signals with frequencies between 0 and 2.5 MHz. This is advantageous in applications such as data centers, where power cables are highly susceptible to high frequency noise.

The UAF42APG4 is easy to use and the application is very straightforward. All that is required is to connect the input and output terminals of the UAF42APG4 and configure the parameters. The power supply and ground connections must also be connected. The on-board OP-Amp is used as the input stage, and the filter is configured using resistors and capacitors.

The UAF42APG4 is an ideal solution for applications that require a high performance filter with fast settling times. The active filter is easy to implement and can provide a variety of solutions for filtering high speed digital communication, RF signals, and other noise and transient noise. The UAF42APG4 is a cost effective solution for many applications and can be used in any situation where a high performance filter is needed.

The specific data is subject to PDF, and the above content is for reference