UB30BCT-E3/4W

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes, rectifiers, and arrays are essential components in the power supply chain. Along with the development of power, their application fields and operating principles have gradually become diversified and sophisticated. The UB30BCT-E3/4W rectifier diode array is a large area, reverse environment, and flexible connection that is suitable for applications where high-current and low-dropout voltage requirements are essential. The diode array is composed of four silicon diodes and is equipped with a variety of control systems that provide specific protection and control functions in order to suit the particular requirements of the device.

The operating principle of the UB30BCT-E3/4W diode array is based on the properties of reverse currents and the reduction of the forward voltage drop. It consists of two single-phase diodes that are connected back-to-back in series with a common cathode. When a voltage is applied to the common cathode, the two single-phase diodes become short-circuited, forcing the current to flow in one direction through the two diodes and out through the common cathode. The voltage drop across each diode is very small, typically no more than 0.7V, so the UB30BCT-E3/4W diode array is able to support high currents without the need for a high voltage drop.

The UB30BCT-E3/4W diode array is commonly used for Industrial Power Supply (IPS) applications. It has a wide variety of uses in the power supplies of computers, consumer electronics, medical equipment and industrial machinery. The diode array can be used in a variety of configurations, including two single-phase low-dropout diodes arranged in a bridge rectifier configuration, and two single-phase rectifying diodes that are connected in parallel to form a phase-shift rectifier configuration. In either configuration, the UB30BCT-E3/4W diode array provides low-dropout voltage and is able to support higher current levels without experiencing any substantial voltage drop.

In addition to the industrial power supply applications, the UB30BCT-E3/4W diode array can also be used in a variety of automotive and automotive electronic applications. The diode array can be used as a single-phase rectifying diode in a car audio system, a fuel injection system, or other automotive components. It can also be used as a bridge rectifier for DC voltage regulation. Its low-dropout voltage and high duty cycle make it highly efficient for automotive applications. The UB30BCT-E3/4W diode array offers a high degree of flexibility in terms of connection, providing multiple configuration options for those seeking a tailored power supply solution.

The UB30BCT-E3/4W diode array is also used in DC to DC converters, power rectifiers, and multiphase, low-dropout voltage regulators. In a multiphase, low-dropout voltage regulator, the UB30BCT-E3/4W diode array is used to reduce the forward voltage drop while maintaining the accurate control of the output current. For DC to DC converters, the diode array helps stabilize the output and provide a stable output voltage while eliminating transient voltage drops. In power rectifiers, the failure rate of fuses is reduced and their efficiency is increased through the use of the UB30BCT-E3/4W diode array.

The UB30BCT-E3/4W diode array is an advanced, high-performance rectifier diode array that offers users a great deal of versatility and flexibility. With its wide range of applications, you can be sure that the UB30BCT-E3/4W diode array will provide you with a reliable and efficient power supply solution.

The specific data is subject to PDF, and the above content is for reference