Allicdata Part #: | UB8DT-E3/4W-ND |
Manufacturer Part#: |
UB8DT-E3/4W |
Price: | $ 0.31 |
Product Category: | Discrete Semiconductor Products |
Manufacturer: | Vishay Semiconductor Diodes Division |
Short Description: | DIODE GEN PURP 200V 8A TO263AB |
More Detail: | Diode Standard 200V 8A Surface Mount TO-263AB |
DataSheet: | UB8DT-E3/4W Datasheet/PDF |
Quantity: | 1000 |
2000 +: | $ 0.27985 |
Series: | -- |
Packaging: | Tube |
Part Status: | Last Time Buy |
Diode Type: | Standard |
Voltage - DC Reverse (Vr) (Max): | 200V |
Current - Average Rectified (Io): | 8A |
Voltage - Forward (Vf) (Max) @ If: | 1.02V @ 8A |
Speed: | Fast Recovery = 200mA (Io) |
Reverse Recovery Time (trr): | 20ns |
Current - Reverse Leakage @ Vr: | 10µA @ 200V |
Capacitance @ Vr, F: | -- |
Mounting Type: | Surface Mount |
Package / Case: | TO-263-3, D²Pak (2 Leads + Tab), TO-263AB |
Supplier Device Package: | TO-263AB |
Operating Temperature - Junction: | -55°C ~ 150°C |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
A diode is an electronic component that conducts current in one direction and blocks current from flowing in the opposite direction. The UB8DT-E3/4W is a fast recovery rectifier that is able to withstand high reverse surge current. It also has a low forward voltage drop, making it an ideal component to use in a multitude of applications.
One of the applications that the UB8DT-E3/4W rectifier can be used in is to form a bridge rectifier. As with other diodes, a bridge rectifier can be used to convert the alternating input voltage of an AC power source into a pulsed direct voltage. This works by using four diodes to form two separate legs. The positive leg of the alternating source is connected to one of the diodes and the negative leg is connected to the other. The resultant pulsed direct current is used to power a variety of applications, from power supplies to motor control.
Another application for this rectifier is for power factor correction. A diode’s ability to conduct and block current at different voltages makes it ideal for this task. By utilizing two sets of diodes, a power supply circuit can be set up where the forward voltage (the voltage across the diodes when current is flowing) can be adjusted to allow maximum power generation while keeping the input voltage low. This allows the power supply to run more efficiently and reduces the amount of energy wasted.
The UB8DT-E3/4W rectifier also works as a freewheeling diode. This is a diode that is connected in parallel with an inductor in order to protect the circuit against a back-EMF when the inductor ceases to conduct. The diode allows the current to bypass the inductor after it has stopped conducting so that the back-EMF doesn’t damage other components. This adds an extra level of protection to the circuit against excess current.
The UB8DT-E3/4W rectifier is able to withstand high reverse surge current and has a low forward voltage drop, making it an ideal component to use in a variety of applications. Its ability to conduct and block current at different voltages makes it especially useful for power factor correction and freewheeling. With its fast recovery time, it is able to protect against excess current while remaining efficient. And with its easy installation and low cost, it is the perfect addition to any circuit.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
UB8DT-E3/4W | Vishay Semic... | 0.31 $ | 1000 | DIODE GEN PURP 200V 8A TO... |
UB8DT-E3/8W | Vishay Semic... | 0.29 $ | 1000 | DIODE GEN PURP 200V 8A TO... |
Diodes - General Purpose, Power, Switchi...
DIODE SCHOTTKY 40V 500MA SC76Diode Schot...
DIODE GEN PURPOSE DO-204ALDiode
DIODE GEN PURP 400V 1A DO41Diode Standar...
DIODE SCHOTTKY 20V 1A DIE 1=400Diode Sch...
DIODE GEN PURP 400V 500MA D5ADiode Stand...