UC2866N

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The UC2866N is a type of AC to DC Converter, Offline Switchers, or PMIC. It is used to regulate, control, or switch the supply of current from an input to an output. It takes an input voltage of up to 26V and converts it to a regulated output voltage of up to 28V. The output voltage is adjustable with an integrated voltage reference and precision error amplifier. The device is suitable for applications such as printers, computers, and other AC powered equipment.

The UC2866N is designed to allow a voltage input range from 4.5V to 32V, and provides a regulated output voltage from 3.3V to 28V. It features peak current mode control, a high frequency internal oscillator and an internal compensation network. This PMIC can detect an input overvoltage fault condition and provides protection against over temperature, over current protection, and over pressure protection. The UC2866N is available in three packages: TO-220, DIP8 and SOIC8 or pin compatible.

The UC2866N works by converting the input AC voltage to DC voltage. The input voltage is applied to the input power stage, which consists of two MOSFETs. These MOSFETs form an H-bridge pattern, which helps to provide a smooth transition between the AC cycle, and to regulate the output voltage accurately. The MOSFETs are then switched by an oscillator to produce a pulsed current, which is then regulated by a precision error amplifier. The output voltage is then paired with a reference voltage, and the voltage error is detected by a comparator.

The UC2866N is designed to be a high performance, cost effective power converter. Its switching frequency is variable up to 500kHz, enabling the device to remain in peak current mode for lower harmonics, and to keep output ripple (Noise over Loads) to a minimum. With adequate protection features and an adjustable output, this device can be used in a variety of applications such as printers, computer peripherals, power supplies, and LED lighting.

In conclusion, the UC2866N is an AC to DC Converter, Offline Switcher, or PMIC that can be used to provide regulated output voltages from 3.3V to 28V. It is ideal for applications where minimal output ripple, or noise over load, is desired. This device can be implemented in many applications including printers, computers, power supplies and LED lighting. Its high frequency internal oscillator allows for a variable frequency up to 500kHz, and its integrated voltage reference and precision error amplifier enable accurate regulation of the output voltage.

The specific data is subject to PDF, and the above content is for reference