UDN2916LB

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The UDN2916LB is a device used for driving bipolar stepping motors. It is a type of PMIC (Power Management ICs) Motor Drivers, Controllers, meaning that it converts power from one form to another, as in from AC to DC. UDN2916LB allows a relatively slow, stepping-motor driver to be used in applications where response time, current levels, and noise control would all be improved through the use of switching technology.

The UDN2916LB IC is based on an H-bridge, which is a four-switch circuit used to control power to a motor. This type of driver is commonly used with DC motors, AC motors, or inverters. The four switches typically include two in the upper path, and two in the lower path, which are used to switch the power between the motor’s positive and negative load current paths. Each switch is controlled by a control pin, which, when invoked, allows electrical current to flow between the motor’s positive and negative load current paths.

UDN2916LB operates by the application of a PWM (Pulse-width Modulation) signal. This signal, along with the start/stop logic inputs and the clock input, controls the rotation direction (one way or the other) and speed of the connected motor. The direction and speed of the motor can be altered while the motor is operating by varying the width of the PWM signal, allowing the motor speed to be ramped up or down. Controlling in this way can be used to achieve smoother operation and acceleration characteristics.

From the above, it can be seen that UDN2916LB is a bidirectional, two-stage H-bridge driver integrated circuit. It is configured to provide a two-phase bipolar output and is designed to give a maximum current of 600mA, and peak current of 1.2A. It is designed to drive high-inductance loads with very high efficiency, can be operated in a voltage range of 4.0V to 20V and can be used to drive various types of stepping motors.

The UDN2916LB is particularly suited for applications such as small DC motors, robotic arm actuators, stepper motors, and other DC/AC motor drivers. With its low power consumption and wide operating voltage range, it is able to deliver driving voltage to motor loads, while also providing a low standby current to limit power dissipation, thus helping to conserve battery life.

In conclusion, the UDN2916LB is an efficient way to drive bipolar stepping motors. It is a bidirectional, two-stage H-bridge driver integrated circuit with a low power consumption, wide operating voltage range and wide temperature range. It is suited for applications such as small DC motors, robotic arm actuators, stepper motors, and other DC/AC motor drivers, and can provide a maximum current of 600mA, and peak current of 1.2A.

The specific data is subject to PDF, and the above content is for reference