UES1303

Series:	--
Packaging:	Bulk
Part Status:	Active
Diode Type:	Standard
Voltage - DC Reverse (Vr) (Max):	150V
Current - Average Rectified (Io):	6A
Voltage - Forward (Vf) (Max) @ If:	925mV @ 6A
Speed:	Fast Recovery = 200mA (Io)
Reverse Recovery Time (trr):	30ns
Current - Reverse Leakage @ Vr:	5µA @ 150V
Capacitance @ Vr, F:	--
Mounting Type:	Through Hole
Package / Case:	B, Axial
Supplier Device Package:	--
Operating Temperature - Junction:	175°C (Max)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

。

Introduction

A UES1303 is a diode-rectifier single component that can be used to convert alternating current (AC) flows into direct current (DC). This component is designed with a reverse recovery time, meaning the voltage and current may be offset to reduce the amount of power consumed. The component is typically used in various appliances, such as automobiles and water heaters, or in integrated circuits and other electronic equipment.

Applications of UES1303

The UES1303 component is mainly used in automobile charging systems and water heaters. Automobiles typically have a lower voltage, slow current source, which needs to be stepped up by the UES1303 component before it is used by the engine. The component decreases the voltage while increasing the current to power the vehicle efficiently.In water heaters, the component is used to charge and control the flow of the heated water. UES1303s are used to efficiently control and direct current to the heater coil, allowing for a desired and efficient flow and temperature of the heated water. A UES1303 can also be used in other applications such as motor-home entertainment systems and solar photovoltaic systems. The component is also used in isolation circuits, switching circuits, and voltage regulators in integrated circuits. Additionally, UES1303s are found in television, DVD players, and computer monitors, where the component is effective in reducing the power consumption and increasing the power efficiency of the device.

Working Principle of UES1303

The UES1303 converts AC energy into DC energy. The UES1303 is a single component, with two diodes attached to a substrate, which features an inner junction between the two diodes. This junction, also known as the anode, is the part of the UES1303 that connects to the power source and is responsible for rectifying the current flow.When an AC voltage is applied across the anode, the current alternates between a positive and negative cycle. The positive cycle will cause one of the diodes to conduct a forward current, while the opposite diode will not conduct. Conversely, when a negative cycle is applied, the opposite diode will conduct a forward current and the other diode will not.The UES1303 is designed with a reverse recovery time which allows the current to be offset and reduces the amount of power consumed. The reverse recovery time is the time that it takes for the two diodes to switch from forward current to reverse current. The shorter the reverse recovery time, the more efficiently the UES1303 will be able to control power flow.

Conclusion

The UES1303 is a single diode-rectifier component that is used to convert AC energy into DC energy. The component is mainly used in automobiles and water heaters, as well as other electronic equipment and integrated circuits. The working principle of the UES1303 is based on the diode-rectifier configuration, where the voltage and current can be offset to reduce power consumption. With its reverse recovery time, the UES1303 is effective in reducing the power consumption of various appliances.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description