UF3003-T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The UF3003-T is a single-phase rectifier bridge designed to offer excellent d.c characteristics. Its main purpose is to convert ac voltage provided to its input terminals, to a pulsating d.c voltage at its output terminals.

The UF3003-T features three diodes connected to each other in a bridge configuration in order to provide a full-wave rectification by allowing current flow in either direction during alternate half-cycles of the input voltage. During each positive half-cycles of the input voltage, the upper two diodes will be forwardbiased, allowing current flow in one direction, while during each negative half-cycle, the bottom two diodes will be forward-biased and allow current flow in the opposite direction, thus resulting in all the input cycles being converted to a pulsating, filtered and smoothened d.c output.

The UF3003-T\'s application fields include applications such as power rectification for power supplies for electronic equipment, motors, lamps, small appliances, and consumer electronics. It can also be used in power conversion from ac to dc, motor speed control, and energy storage devices. Additionally, it can be used as a flyback diode when connected in parallel with an inductor.

The UF3003-T is made up of three terminals, two of which are anode and cathode, with the third being the reference terminal or the emitter. This bridge rectifier contains three silicon diodes which can conduct current in only one direction, meaning an ac input applied must be positive with respect to the reference terminal, or negative with respect to it, in order to generate a dc output voltage.

The UF3003-T is typically used on medium power applications, usually at 50 GHz and above. It has a low voltage drop and very low leakage current. The UF3003-T can be used in a wide range of temperature conditions, from -40°C to +100°C. Its main feature is its ability to handle voltage ways up to 600V.

The UF3003-T includes the following specifications: a rated current of 30A, a rated voltage of 600V, a surge current of 75A, an operating temperature range of -40°C to +100°C, and a reverse recovery time of less than 4ns. It also offers low noise and is capable of switching rapidly to meet high frequencies and short duty cycles.

In summary, the UF3003-T is a single-phase rectifier bridge designed to convert ac voltage to pulsating, filtered and smoothened d.c output. It can be used in applications such as power rectification, power conversion from ac to dc, motor speed control, energy storage devices, and as a flyback diode. Also, its main feature is its ability to handle voltage ways up to 600V and its respective specifications offer good performance and value.

The specific data is subject to PDF, and the above content is for reference