UF5403-E3/54 Discrete Semiconductor Products

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes are a type of two-terminal electronic component that allows electrical current to flow through it in only one direction. They are used extensively in electronic circuits, and are usually the only way to convert AC to DC. Rectifier diodes, in particular, are specially designed to operate in alternating current environments, and can offer protection from unwanted current. Rectifier diodes can be found in a variety of shapes and sizes depending on the application, one example being the UF5403-E3/54.

UF5403-E3/54 Application Field

The UF5403-E3/54 is a standard rectifier diode made of silicon and designed to work with a forward voltage of 1.300 V. It is used as a general replacement for other rectifier diodes in almost any electronic circuit. The UF5403-E3/54 can handle surge currents of up to 10 A and has a reverse-voltage rating of of 200 V. It is also housed in an OEM enclosure, making it a good choice for applications where a standard rectifier diode would be too large or expensive.

Its main application field is in power supplies, where it can serve as a stand-alone diode to regulate current flow from a power source to the load, protect against over-voltage, and provide DC power to the circuit. It is also used for switching supplies, which convert alternating current voltage to direct current voltage, and for radio-frequency amplifiers, which ensure that all the signals propagated in the circuit stay within their required frequency range.

UF5403-E3/54 Working Principle

The UF5403-E3/54 has two terminals, the anode and the cathode, to which an electric current is applied. When a negative electric charge is applied to the anode, it will cause an electric current to flow through the diode, and out through the cathode. This is known as forward biasing. When a positive electric charge is applied to the anode, the diode will block the current, preventing it from passing through. This is known as reverse biasing.

When current is flowing through the UF5403-E3/54, it will convert alternating current (AC) to direct current (DC). This process is known as rectification and is important for electric circuits that require a consistent voltage. The UF5403-E3/54 has a low forward voltage drop, meaning that it will draw less power from the electric current, reducing power loss and yielding a higher efficiency.

Due to its low forward voltage drop and high reverse-voltage rating, the UF5403-E3/54 is a good choice for power supplies and radio-frequency amplifiers. Its small size and low cost make it a great choice for OEM projects where space and cost are major considerations.

The specific data is subject to PDF, and the above content is for reference