UG1A-E3/73

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The UG1A-E3/73 rectifier diode is a commercial semiconductor device with a variety of applications and principle of operation. This device is manufactured by semiconductor companies that specialize in rectifiers and as such is unique, with various features to suit a variety of applications.

The rectifier diode has a relatively modest operating range of -20C to +60C, and is capable of automatically handling up to 3A of forward current. Its reverse blocking voltage is a nominal 75V and it has PN junction capacitance of 5pF. The junction capacitance of the rectifier is significant as it provides some degree of protection from high frequency transients and voltage surges.

The most common application for the UG1A-E3/73 rectifier diode is for general-purpose rectification in power supplies. In this application, a single rectifier diode is placed in the center of a reverse-biased circuit, with the anode of the diode connected to the positive voltage source and the cathode connected to the negative voltage source. The operation of the diode is to pass only the positive half-cycles of the alternating current, thus rectifying the waveform. This effectively converts the waveform from AC to DC and also provides protection against high frequency transients.

Another application of the UG1A-E3/73 rectifier diode is as a feature in some RF circuits. For example, in radio frequency (RF) oscillators, the rectifier diode may be used to rectify the signal, allowing the circuit to detect the presence of an incoming signal. Additionally, it can be used in RF power amplifiers, allowing the circuit to increase the signal strength of the incoming RF signal.

The working principle of the UG1A-E3/73 rectifier diode is based on the principle of PN junction. To explain in simple terms, when a voltage is applied between the anode and cathode of the diode, the p-type semiconductor material at the anode of the diode becomes negatively charged while the n-type semiconductor material at the cathode of the diode becomes positively charged. This creates a barrier between the two materials, which is known as the “PN junction.” When a forward bias voltage is applied to the rectifier diode, this barrier is overcome, allowing current to pass through the diode in the forward direction. Conversely, when the bias voltage is reversed, the PN junction prevents the current from flowing in the reverse direction.

The UG1A-E3/73 rectifier diode is a widely used component in many applications, due to its high current rating, low junction capacitance, and range of operating temperatures. It is a helpful component in providing protection from transient voltage surges, as well as helping to convert AC to DC. It is important to remember that the principle of the rectifier diode is based on the PN junction and therefore the operating characteristics of the diode will be greatly affected by how this junction is formed and maintained.

The specific data is subject to PDF, and the above content is for reference