UG2004-T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

A diode is a device used to allow electric current to pass in only one direction. A single diode, also known as a rectifier, is designed specifically to rectify alternating current (AC) to direct current (DC). The UG2004-T is a type of rectifier diode, commonly known as a Fast Recovery rectifier diode, which has a lower forward voltage drop, a high frequency operation and a fast recovery time, thus offering improved performance as compared to other rectifier diodes.

The UG2004-T is a silicon rectifier diode with a glass passivation layer. It is available in two different case styles, one in a standard sealed package (HVMS) of 2.59mm x 2mm, and one in a monolithic package (PVX) of 10.25mm x 13mm. The diode is typically used in low voltage, low frequency, high power applications such as power supplies and other high-power rectification circuits.

The UG2004-T has four main characteristics that make it suitable for rectification applications. First, it has a low forward voltage drop, with a peak forward current of 20A and a low forward voltage drop of 1.2V. Second, it is designed to operate at high frequencies, up to 1MHz, allowing it to respond quickly to changing input AC voltages. Third, it has a fast recovery time of less than 20ns, allowing it to switch on and off quickly while providing a constant output voltage. Additionally, the device is designed to handle high power loads, with its maximum power dissipation of 250W.

The working principle behind the UG2004-T rectifier diode is relatively simple. When the diode is forward-biased, a forward current flows through the diode and into the load, thus rectifying the alternating current to direct current. When the diode is reverse-biased, the diode is blocked, causing no current to flow, thus ensuring that no current is sent back into the power source.

As a fast recovery rectifier diode, the UG2004-T is suitable for use in a wide variety of applications, such as power supplies, inverters, motor drives, switching power supplies, and other high-power rectification circuits. It is often used in automotive, industrial, consumer and telecom applications to provide reliable, high-efficiency power conversion and switching.

In conclusion, the UG2004-T is a fast recovery rectifier diode with a low forward voltage drop, a high frequency operation, and a fast recovery time. It is used in a variety of applications, including power supplies, inverters, motor drives, switching power supplies, and other high-power rectification circuits. The working principle behind it involves the rectification of an AC voltage to a DC voltage by forward biasing the diode and blocking the flow of current when the diode is reverse-biased.

The specific data is subject to PDF, and the above content is for reference