Allicdata Part #: | UG2A-E3/73-ND |
Manufacturer Part#: |
UG2A-E3/73 |
Price: | $ 0.11 |
Product Category: | Discrete Semiconductor Products |
Manufacturer: | Vishay Semiconductor Diodes Division |
Short Description: | DIODE GEN PURP 50V 2A DO204AC |
More Detail: | Diode Standard 50V 2A Through Hole DO-204AC (DO-15... |
DataSheet: | UG2A-E3/73 Datasheet/PDF |
Quantity: | 1000 |
4000 +: | $ 0.09833 |
Specifications
Series: | -- |
Packaging: | Tape & Box (TB) |
Part Status: | Active |
Diode Type: | Standard |
Voltage - DC Reverse (Vr) (Max): | 50V |
Current - Average Rectified (Io): | 2A |
Voltage - Forward (Vf) (Max) @ If: | 950mV @ 2A |
Speed: | Fast Recovery = 200mA (Io) |
Reverse Recovery Time (trr): | 25ns |
Current - Reverse Leakage @ Vr: | 5µA @ 50V |
Capacitance @ Vr, F: | -- |
Mounting Type: | Through Hole |
Package / Case: | DO-204AC, DO-15, Axial |
Supplier Device Package: | DO-204AC (DO-15) |
Operating Temperature - Junction: | -55°C ~ 150°C |
Description
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Introduction to UG2A-E3/73 Rectifier
The UG2A-E3/73 is a type Single Rectifier, and as such finds application in a wide range of electrical and electronic devices. It is typically used in applications such as AC to DC and AC to DC motor control.Applications
The UG2A-E3/73 rectifier has the ability to process both alternating current (AC) and direct current (DC) electrical signals, making it an excellent choice for any application where AC or DC power needs to be converted to a usable format. In particular, they can be used as efficient switches in device control and communication applications.The UG2A-E3/73 is often used to convert AC electrical signals into DC electrical signals, with the benefits being that the process is more efficient than using traditional resistors or transistors. In addition, the rectifier can be used to regulate and maintain the strength of the current passing through the device, thus avoiding power spikes or short-circuiting. The UG2A-E3/73 rectifier is commonly used in devices such as Audio Power Amplifiers, Digital-to-Analog converters, Motion Controls, Audio Mixers and Power Supplies. It is also used in energy harvesting applications such as Solar Cells, Wind Turbines, and Water Mills.Working Principle
The UG2A-E3/73 is a type of single rectifier, and as such operates by passing a current through two semiconductor layers called diodes. When the current passes through the diodes in one direction, they act like a switch, allowing the current to pass through without much resistance. When the current passes in the opposite direction, the diodes act like a block, stopping the current flow entirely, while at the same time limiting the amount of power that travels back to the original sources. This type of rectification is effective in protecting the device form power spikes, shorts or power outages, as the current is blocked off in the opposite direction. In addition, because it works by passing a current through a semiconductor layer, the rectification process is much more efficient than the traditional resistor or diode rectifier.The UG2A-E3/73 rectifier delivers a consistent, regulated output that can be used reliably in any application where AC or DC power needs to be converted to a usable format. In addition, the rectified current is free from noise, just like a diode, as the UG2A-E3/73 will block any unwanted signals from reaching the original source.Conclusion
The UG2A-E3/73 rectifier is a single rectifier that is commonly used to process alternating current (AC) and direct current (DC) electrical signals. It is often used in applications such as AC to DC conversions, AC to DC motor control, Audio Power Amplifiers, Digital-to-Analog converters, Motion Controls, Audio Mixers and Power Supplies.The UG2A-E3/73 works by passing a current through two semiconductor layers called diodes, while at the same time blocking stray signals that could damage the device or distort the current. By doing so, it is able to convert AC or DC current into a usable, regulated format that is free from noise.The specific data is subject to PDF, and the above content is for reference
Related Products
Search Part number : "UG2A" Included word is 2
Part Number | Manufacturer | Price | Quantity | Description |
---|
UG2A-E3/73 | Vishay Semic... | 0.11 $ | 1000 | DIODE GEN PURP 50V 2A DO2... |
UG2A-E3/54 | Vishay Semic... | 0.11 $ | 1000 | DIODE GEN PURP 50V 2A DO2... |
Latest Products
IDW30E65D1
Diodes - General Purpose, Power, Switchi...
PMEG4005AEA/M5X
DIODE SCHOTTKY 40V 500MA SC76Diode Schot...
RGP10J-057M3/54
DIODE GEN PURPOSE DO-204ALDiode
1N4004-N-2-2-BP
DIODE GEN PURP 400V 1A DO41Diode Standar...
CPD76X-1N5817-CT
DIODE SCHOTTKY 20V 1A DIE 1=400Diode Sch...
JANTXV1N6662US
DIODE GEN PURP 400V 500MA D5ADiode Stand...