UG4C-E3/54

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The UG4C-E3/54 diode is a three-terminal single diode rectifier with a low forward voltage drop and a fast recovery time. It is rated at 54 volts with a current rating of up to 4 amps. The UG4C-E3/54 also features an overload protection and a wide temperature range, making it an ideal option for power supply designs.

The UG4C-E3/54 diode can be used in a variety of applications and is widely used in power supplies and AC/DC converters. It can be used for power rectification, protection against transient surges, and high-speed switching. It is also used in power converters and motor drive systems, where it is often combined with a snubber circuit for higher efficiency.

The UG4C-E3/54 diode consists of two main components: a chip and a package. The chip is composed of rectifier diodes connected in a three-terminal configuration. The package contains a cathode and an anode, and the terminals are covered by a film of insulating material to protect the components from moisture. The chip is built on a substrate to give it greater mechanical strength.

In operation, the UG4C-E3/54 diode works as follows. When voltage is applied to the anode and the diode is forward biased, the diode conducts current in the forward direction. However, when reverse voltage is applied to the anode, the diode is reverse biased and current flow is blocked. This ability to control the direction of current flow allows the UG4C-E3/54 to perform a variety of functions in power supply and AC/DC converter circuits.

The primary use of the UG4C-E3/54 diode is for power rectification. Rectification is the process of converting the alternating current (AC) power input from a power supply into direct current (DC) output. The UG4C-E3/54 diode performs effectively as a rectifier due to its low forward voltage drop and fast recovery time.

The UG4C-E3/54 diode is also used in other applications, such as transient surge protection and high-speed switching. In surge protection, a snubber circuit consisting of a resistor and capacitor is connected to the diode in order to limit the current and reduce noise during high-current transients. In high-speed switching, the UG4C-E3/54 diode can be used to rapidly switch power up or down at regular intervals.

The UG4C-E3/54 diode is a robust, efficient, and cost-effective solution for a variety of applications. Its low forward voltage drop and fast recovery time make it an ideal choice for power supply and AC/DC converter designs. Additionally, its overload protection and wide temperature range ensure reliable operation even in extreme conditions.

The specific data is subject to PDF, and the above content is for reference