UG6005PTHC0G

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The UG6005PTHC0G rectifier array is a high-performance two-phase rectifying device for general low power applications. Its main application field is for applications where unipolar rectifying and very low losses are required.

The UG6005PTHC0G is built using the latest in low-power technology and has been designed to optimize the electrical performance for critical rectifying applications in low-power circuits. It is composed of two parallel sets of rectifiers, arranged in an inverted-V configuration and has a maximum reverse breakdown voltage of 800 V and a maximum forward current of 1.5 A.

Due to its inverted-V configuration, the UG6005PTHC0G rectifier array is capable of completely isolating the input voltage from the output current, thus allowing it to efficiently rectify a wide range of AC voltages over a very large current range. The device is also capable of absorbing very large reverse recovery pulses due to its optimized construction.

The UG6005PTHC0G rectifier array is also designed to be extremely robust, making it suitable for use in high-voltage and high-temperature applications. The device operates at a maximum junction temperature of 150°C, which is significantly higher than the maximum rating of conventional rectifiers. In addition, the low-voltage, low-impedance connections used in this device allow it to withstand transients and withstand large ESD shocks.

The working principle of the UG6005PTHC0G rectifier array is as follows: When a positive voltage is applied to the input of the device, the two rectifying diodes that form the V-configuration, allow current to flow through the two current paths in a forward direction, producing a unipolar rectifying effect. When a negative voltage is applied to the input of the device, the two diodes block the flow of current, in effect reversing the polarity of the applied voltage, and producing a high reverse-recovery pulse.

In conclusion, the UG6005PTHC0G rectifier array is a robust, two-phase rectifier for general-purpose applications that require very low losses and require high-voltage and high-temperature operation. Built using the latest low-power technology, the device is capable of completely isolating the input voltage from the output current and is capable of handling power transients and ESD shocks. Its working principle relies on the use of two parallel sets of rectifiers in an inverted-V configuration, which allow the device to effectively rectify a wide range of AC voltages and absorb large reverse-recovery pulses.

The specific data is subject to PDF, and the above content is for reference