Allicdata Part #: | UH2BHE3_A/I-ND |
Manufacturer Part#: |
UH2BHE3_A/I |
Price: | $ 0.15 |
Product Category: | Discrete Semiconductor Products |
Manufacturer: | Vishay Semiconductor Diodes Division |
Short Description: | DIODE GEN PURP 100V 2A DO214AA |
More Detail: | Diode Standard 100V 2A Surface Mount DO-214AA (SMB... |
DataSheet: | UH2BHE3_A/I Datasheet/PDF |
Quantity: | 1000 |
6400 +: | $ 0.13122 |
Current - Reverse Leakage @ Vr: | 2µA @ 100V |
Capacitance @ Vr, F: | 42pF @ 4V, 1MHz |
Mounting Type: | Surface Mount |
Package / Case: | DO-214AA, SMB |
Supplier Device Package: | DO-214AA (SMB) |
Operating Temperature - Junction: | -55°C ~ 175°C |
Series: | Automotive, AEC-Q101 |
Packaging: | Tape & Reel (TR) |
Part Status: | Active |
Diode Type: | Standard |
Voltage - DC Reverse (Vr) (Max): | 100V |
Current - Average Rectified (Io): | 2A |
Voltage - Forward (Vf) (Max) @ If: | 1.05V @ 2A |
Speed: | Fast Recovery = 200mA (Io) |
Reverse Recovery Time (trr): | 25ns |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The UH2BHE3_A/I is a single rectifier diode which plays an important role as a current limiting device and for efficient current regulation. It is used to provide a steady current to circuits, components and devices, in order to ensure circuit operation. UH2BHE3_A/I rectifiers are used primarily in boost converters to regulate current flow and protect against over-current. It has a wide range of applications from providing regulated current flow to industrial, military, automotive and consumer applications.
The UH2BHE3_A/I is a semiconductor device consisting of a P-type semiconductor and an N-type semiconductor joined together. This particular device has a breakdown voltage of 500V and a maximum current rating of 15A. There are two terminals on the diode, the anode and the cathode, and the device will allow current flow only if a positive voltage is applied to the anode. The UH2BHE3_A/I is a unidirectional device, meaning it allows current flow in one direction only.
The two types of diodes that make up the UH2BHE3_A/I are the P-channel MOSFET and the N-channel MOSFET. The P-channel MOSFET is used to conduct current only when the voltage applied to its gate is above its threshold voltage. The N-channel MOSFET is used to conduct current only when the voltage applied to its gate is below its threshold voltage. This design makes the device highly effective for use in efficient and current limiting applications.
The UH2BHE3_A/I rectifier is also used in power rectifiers. A power rectifier is a device which converts alternating current (AC) to direct current (DC). A power rectifier circuit uses multiple diodes connected together in a bridge circuit configuration to convert the AC signal to a DC signal. The UH2BHE3_A/I is used in power rectifier circuits because of its high current handling capabilities, low vertical resistance, and capability of handling large surge currents.
The UH2BHE3_A/I rectifier is also widely used in switching supplies, which are used to control power in electronic equipment. A switching supply is comprised of an input section, a power switching section, and an output section. The input section receives a voltage input which is then converted by the power switching section into an output voltage. The output section then passes the output voltage to the load. The UH2BHE3_A/I is used in switching supplies as a current limiting device as well as a voltage regulator.
The UH2BHE3_A/I rectifier is also used in AC and DC motor control applications, where it is typically used for dissipating the generated power back into the power source. This allows the device to protect the motor from overloads and improve its long-term functionality. The UH2BHE3_A/I rectifier is also used in heating and cooling systems, where it is typically used as a voltage regulator for electricity provided to the system. This allows it to ensure that the system does not receive too much power and does not blow out.
The UH2BHE3_A/I rectifier diode is a reliable, cost-effective and easy to use device in a variety of applications. As a unidirectional current limiting device, the UH2BHE3_A/I can be used to provide a steady current to circuits, components and devices, protect against overcurrent, regulate current flow, protect motors from overloads, and control voltage. It is a versatile and efficient device that can be used in a wide range of applications.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
UH2BHE3_A/I | Vishay Semic... | 0.15 $ | 1000 | DIODE GEN PURP 100V 2A DO... |
UH2BHE3_A/H | Vishay Semic... | 0.15 $ | 1000 | DIODE GEN PURP 100V 2A DO... |
UH2B-E3/5BT | Vishay Semic... | 0.0 $ | 1000 | DIODE GEN PURP 100V 2A DO... |
UH2BHE3/5BT | Vishay Semic... | 0.0 $ | 1000 | DIODE GEN PURP 100V 2A DO... |
UH2B-E3/52T | Vishay Semic... | 0.0 $ | 1000 | DIODE GEN PURP 100V 2A DO... |
UH2BHE3/52T | Vishay Semic... | 0.0 $ | 1000 | DIODE GEN PURP 100V 2A DO... |
Diodes - General Purpose, Power, Switchi...
DIODE SCHOTTKY 40V 500MA SC76Diode Schot...
DIODE GEN PURPOSE DO-204ALDiode
DIODE GEN PURP 400V 1A DO41Diode Standar...
DIODE SCHOTTKY 20V 1A DIE 1=400Diode Sch...
DIODE GEN PURP 400V 500MA D5ADiode Stand...