UPC3251T7L-E1-A

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The UPC3251T7L-E1-A is a radio frequency (RF) miscellaneous integrated circuit (IC) and module produced by Asian Microsemi. This component is a transceiver module, which specializes in transmitting and receiving radio waves at a frequency of 1.8GHz in the GSM 450 band.The device features two amplifier and transistor (TIA) circuits, a voltage-controlled oscillator (VCO), an Automatic Frequency Control (AFC) circuit, a secondary transmit/receive (T/R) switch, an active bias circuit, and a low-noise amplifier (LNA) with high linearity. The device also includes a digital control circuit, which uses a serial peripheral interface (SPI) to accept external control signals.The UPC3251T7L-E1-A is well-suited for use in cellular base station and personal communication services (PCS) applications. It is also used in other wireless communication systems, such as cordless phones, wireless local loop (WLL) systems, and wireless data systems.The UPC3251T7L-E1-A has three main operating modes: receive, transmit, and transmit/receive (T/R). The VCO controls the device\'s frequency by accepting an external control voltage. The AFC circuit locks the device to any frequency in the 45MHz range and maintains the desired frequency by feeding adjustment signals to the VCO. The active bias circuit ensures proper biasing and current levels. The LNA, transmit and receive amplifiers, and T/R switch are used to optimize power efficiency, signal-to-noise ratio (SNR), and distortion.

The receive mode of the UPC3251T7L-E1-A is used to amplify incoming RF signals. The LNA is used to amplify weak signals from the antenna, while the receive amplifier is used to further increase signal strength and improve SNR. In transmit mode, the T/R switch is used to pass the RF signal from the external power amplifier to the antenna. The transmit amplifier is used to boost the output power of the power amplifier, while the digital control circuit adjusts the device\'s bias and frequency as needed. In transmit/receive mode, the device is capable of both transmitting and receiving signals at the same time. The LNA is used to amplify the incoming signals, while the transmit and receive amplifiers are used to optimize output power. The T/R switch is used to switch the device back and forth between transmit and receive modes. The UPC3251T7L-E1-A is a highly integrated RF transceiver module which is well-suited for use in cellular base station and personal communication service (PCS) applications. It has a frequency range of 451MHz and provides excellent linearity and power efficiency. The device also features a digital control circuit, which allows for precise frequency control and bias optimization.

The specific data is subject to PDF, and the above content is for reference