UPD78F0495GC-GAD-AX

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The UPD78F0495GC-GAD-AX is an 8-bit microcontroller integrated circuit developed by NEC Electronics. It is part of the 78K0 family of microcontrollers and is designed for embedded applications. It is a high-performance, low-power, low-voltage CMOS processor with on-chip flash memory and a built-in boot/diagnostic ROM for ease of development.

The UPD78F0495GC-GAD-AX microcontroller is primarily used in automotive applications. It can be used in ABS braking systems, engine control units (ECUs), powertrain control modules (PCMs), security systems, and body control modules (BCMs). It is also used in industrial applications such as robotics, automation, and machine tools. The UPD78F0495GC-GAD-AX is also suitable for non-automotive applications, such as home appliances and medical devices.

The UPD78F0495GC-GAD-AX is based on the 78K0 architecture and has an operating temperature range of -40°C to +105°C. It has an 8-bit data bus, 16-bit program counter and 8-bit accumulator, and a 16-bit stack pointer. It has four 8-bit general-purpose registers, and a 16-bit software stack. It has two 8-bit timer/counters, one 16-bit timer/counter, and two 8-bit capture/compare/pwm modules. It also has an 8-bit serial port and a 16-bit external bus. It has 8KB of on-chip flash memory and supports up to 128KB of external ROM and 512KB of external RAM. The UPD78F0495GC-GAD-AX has a wide range of features, such as an operating voltage range of 2.7V to 5.5V, a maximum operating frequency of 40MHz, and an I/O port with up to 26 channels.

The UPD78F0495GC-GAD-AX uses a 7-stage pipeline architecture and has an internal RAM of 512 bytes. It has a four-stage instruction fetch unit, a two-stage instruction decoding unit, and a one-stage instruction execution unit. The core also contains an interrupt handling unit and a register bank. Additionally, it has an optional on-chip coprocessor. The UPD78F0495GC-GAD-AX supports up to 64 interrupts and has an interrupt latency of 8 cycles.

The UPD78F0495GC-GAD-AX has a wide range of debug features, such as an on-chip debugging controller, two breakpoints, a watchpoint, and an external breakpoint. It also has a power-saving Sleep Mode to reduce power consumption. It has a high-speed serial port with speeds up to 48MHz and a wide range of communication protocols, including CAN, LIN, I2C, SPI, and UART. The UPD78F0495GC-GAD-AX also has a wide range of analog features, such as an on-chip Op Amp and Comparator.

The UPD78F0495GC-GAD-AX is designed with low power consumption in mind and incorporates several power saving modes, such as clock gating and power-down mode. Additionally, it has an on-chip power-on reset circuit and an on-chip LDO voltage regulator. The UPD78F0495GC-GAD-AX has built-in Error Correction Code (ECC) and Privacy Protection Features (PPF). It is also RoHS compliant and supports JTAG, I2C, SPI, UART, and CAN data debugging.

In conclusion, the UPD78F0495GC-GAD-AX is an 8-bit microcontroller integrated circuit developed by NEC Electronics. This microcontroller is primarily used in automotive, industrial, and non-automotive applications such as robotics, automation, home appliances, and medical devices. This microcontroller supports up to 64 interrupts, a power-saving sleep mode, and a wide range of debug features, including an on-chip debugging controller, two breakpoints, a watchpoint, and an external breakpoint. In addition, it has a wide range of analog features, such as an on-chip Op Amp and Comparator. The UPD78F0495GC-GAD-AX is designed with low power consumption in mind and incorporates several power saving modes, such as clock gating and power-down mode. This microcontroller is RoHS compliant and supports JTAG, I2C, SPI, UART, and CAN data debugging.

The specific data is subject to PDF, and the above content is for reference