USBULC6-2F4 Circuit Protection

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Transient Voltage Suppressors (TVSs) are electrically compounded structures, usually based on Silicon or Zener diodes, and designed to protect sensitive electronic components and systems from voltage surges and transients caused by lightning, inductive switch and load switching. TVSs were developed to provide superior protection and perform successfully under harsh operational conditions. USBULC6-2F4 is one of the widely used and reliable products belonging to this family.

The USBULC6-2F4 is an integrated component with an ultra-low capacitance TVS diode array (UL6-2F4). The diode array is designed in a bi-directional “ESD-safe” configuration for protecting data lines from Electro Static Discharge (ESD) and other voltage transients. It is housed in a small 6-pin miniature Unidirectional Low Capacitance (ULC) surface mount package and offers a capacitance of just 0.55 pF typical between two I/O pins. The USBULC6-2F4 is an ideal device to protect new and upgraded High Speed Data Lines.

The design of USBULC6-2F4 allows EMI protection for noisy environments that are present in today’s multimedia applications. It provides ESD protection up to 15kV air discharge or 8kV contact discharge (Human Body Model) for data lines. The product also features a clamping voltage of approximately 8V. This enables the USBUL6-2F4 to withstand high line-to-ground transient voltage spikes without breakdown.

The USBULC6-2F4\'s structure work on the same principle as other TVS devices that provide device protection. It uses a p-n junction to clamp a surge voltage whenever the voltage exceeds a certain level. An external valid ULC package is used for this purpose in the USBULC6-2F4. When this threshold voltage is breached, the TVS diode switches, allowing the surge current to travel in the same direction as the external ground. This current is then dissipated or drained through the external ground, thus protecting the protected component. The clamped voltage is usually between 7V and 8V.

The USBULC6-2F4 TVS diode array can be employed in a number of different applications. It can be used to protect devices and systems from voltage spikes driven by lightning and other sources, and to provide protection against ESD and transients. It is especially suitable for protecting computers, laptop computers, peripherals, consumer electronics, communication systems, automotive electronics, and medical equipment. Any operated devices subjected to severe and sudden spikes of voltage should consider employing USBULC6-2F4 as a precautionary measure in order to protect these devices from permanent damage.

In conclusion, USBULC6-2F4 is a reliable and cost-effective protection solution for high-speed data lines from ESD and other surge-related issues. By employing the USBULC6-2F4, end-users are assured of their devices’ safety from voltage spikes and extreme electrical surges. It is also easy to install and maintain, as it is small in size and does not require any additional external components.

The specific data is subject to PDF, and the above content is for reference