Allicdata Part #: | USC1306-ND |
Manufacturer Part#: |
USC1306 |
Price: | $ 10.91 |
Product Category: | Discrete Semiconductor Products |
Manufacturer: | Semtech Corporation |
Short Description: | DIODE GEN PURP 400V 5A AXIAL |
More Detail: | Diode Standard 400V 5A Through Hole Axial |
DataSheet: | USC1306 Datasheet/PDF |
Quantity: | 1000 |
250 +: | $ 9.81239 |
Series: | -- |
Packaging: | Bulk |
Part Status: | Active |
Diode Type: | Standard |
Voltage - DC Reverse (Vr) (Max): | 400V |
Current - Average Rectified (Io): | 5A |
Voltage - Forward (Vf) (Max) @ If: | 1.25V @ 3A |
Speed: | Fast Recovery = 200mA (Io) |
Reverse Recovery Time (trr): | 50ns |
Current - Reverse Leakage @ Vr: | 20µA @ 400V |
Capacitance @ Vr, F: | 90pF @ 10V, 1MHz |
Mounting Type: | Through Hole |
Package / Case: | Axial |
Supplier Device Package: | Axial |
Operating Temperature - Junction: | -55°C ~ 150°C |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
A diode, specifically a single rectifier, is a two-terminal electronic component that has a nonlinear I-V (current-voltage) characteristic. It can be used in a variety of applications. The most common type is the USC1306, a silicon-based, unidirectional device with low forward voltage drop, which makes it suitable for use in DC/DC converters and power supplies. Here we will discuss the application fields and working principles of the USC1306 diode.
Applications of the USC1306 diode
The USC1306 is most commonly used in DC/DC converters and power supplies. It can be configured as an electrolytic capacitor multiplier and used as a charge pump to provide high voltage, current, or voltage overshoot protection, as well as overcurrent protection. It can also be used as a low loss rectifier in applications such as battery chargers, DC/DC converters, and power supplies. Additionally, it can be used to provide AC-DC rectification, static and soft-start circuits, inrush current limiting, switching, and as a snubber diode in switch-mode power supplies.
When used in AC/DC rectification, the USC1306 can provide high output current and low voltage drop, allowing it to be used in low profile applications where space is an issue. Additionally, the USC1306 can be used to form an essential part of a voltage-controlled oscillator circuit that is used for frequency tuning applications.
Working principle of the USC1306 diode
The USC1306 single rectifier diode has a nonlinear I-V (current-voltage) characteristic. When the positive side of the diode is more positive than the negative side (forward biased), the current flows in one direction through the diode, and when the positive side of the diode is less positive than the negative side (reverse biased), no current flows in either direction through the diode. When forward biased, the voltage drop through the diode is low, typically less than 0.7V, allowing current to flow through with minimal loss.
When used in AC/DC rectification, the USC1306 is used as a full-wave rectifier. It allows current to flow only during the positive half-cycle and blocks current during the negative half-cycle, forming a half-wave rectifier. It consists of four USC1306 diodes connected in a bridge rectifier configuration. When a voltage source is connected between the two bridge rectifier outputs, the output voltage is the sum of the two half-cycles that are in-phase. The DC output from the bridge rectifier is filtered by an electrolytic capacitor to filter out the AC ripple.
In power supplies, the USC1306 diode can also be used as a charge pump to provide high voltage, current, or voltage overshoot protection and overcurrent protection. In this application, the USC1306 diodes are connected in series and connected to a capacitor. As the capacitance of the capacitor increases, the voltage across the series diodes increases, allowing current to flow through the circuit. This current is then directed to either the load or the power supply.
As we can see, the USC1306 single rectifier diode is a versatile diode with a variety of applications. It can be used as a low drop rectifier and as a charge pump, as well as in other applications where a diode is required. Its low forward voltage drop makes it particularly suitable for use in DC/DC converters and power supplies, where it can be used to regulate output voltage and current levels and provide protection from overload and overvoltage. If you are looking for a reliable and versatile diode, the USC1306 single rectifier diode is an excellent choice.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
Diodes - General Purpose, Power, Switchi...
DIODE SCHOTTKY 40V 500MA SC76Diode Schot...
DIODE GEN PURPOSE DO-204ALDiode
DIODE GEN PURP 400V 1A DO41Diode Standar...
DIODE SCHOTTKY 20V 1A DIE 1=400Diode Sch...
DIODE GEN PURP 400V 500MA D5ADiode Stand...