V07P385

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

TVS (Transient Voltage Suppressors) are used in electrical circuits to protect against overvoltage transients that might otherwise cause irreparable damage. Varistors, also known as voltage-dependent resistors (VDRs), are one type of TVS. Just like traditional resistors, VDRs also have a resistance that changes with the voltage applied across them. The unique feature of VDRs is that the resistance changes significantly with small changes in the applied voltage. This makes them particularly useful in circuits where the voltage is expected to fluctuate. An example of this could be an automotive circuit, where engine vibrations or other factors can cause the voltage to fluctuate beyond normal operating limits.

Movie varistors (MOVs) are also a type of TVS and are constructed from two plates of metal separated by a ceramic disk. A voltage applied to the MOV causes the plates to interact and widen the ceramic disk, thus reducing the resistance between the plates. This decrease in resistance is what gives MOVs their fast electrical response times and is what makes them ideal for protection against overvoltage transients.

The V07P385 is a general purpose, low-capacitance single-phase varistor. It is a 7th order varistor designed to protect against transient overvoltage in single-phase circuits. It has a rated voltage of 3.2V and a typical breakdown voltage of 3.33V, and it has a response time of 5 nanoseconds. Its low capacitance makes it suitable for use in high frequency applications. The V07P385 also has a non-linear resistance that changes as the voltage across it changes. This resistance acts as a voltage clamp, ensuring that the voltage across the varistor never exceeds its rated value.

The V07P385 finds application in a wide variety of industries. It is commonly used in automotive applications such as power windows, electric door locks, and HVAC systems. In addition, it is used to protect consumer electronics from damage caused by power surges. It is also used in industrial applications such as motor control circuits and HVAC systems. It has a wide operating temperature range and can withstand up to 1000 volts of transient overvoltage.

The working principle of the V07P385 is relatively simple. When a voltage above the rated value is applied across the V07P385, its resistance changes, creating a voltage clamp that prevents the voltage from going any higher. When the voltage drops below the rated value, the resistance of the V07P385 returns to its original value and the voltage is no longer clamped. This process can repeat itself many times, allowing the V07P385 to continually protect the circuit from overvoltage transients.

In summary, the V07P385 is a single-phase varistor that is used to protect electrical circuits from overvoltage transients. It has a low capacitance and a fast response time that make it suitable for use in automotive and consumer electronics applications. The V07P385 works by changing its resistance when the voltage across it exceeds its rated value, creating a voltage clamp that prevents the voltage from going any higher.

The specific data is subject to PDF, and the above content is for reference