V10E385

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

TVS - Varistors, MOVs are widely used in various electronic systems in order to protect it from transient voltage or voltage surges. Varistors, also known as voltage-dependent resistors (VDRs), are widely used for this purpose due to their ability to absorb transient voltage and quickly clamp it below a specified level. The V10E385 TVS MOV is a type of varistor and is specifically designed for protecting electronic systems from unexpected and damaging voltage transients.

The V10E385 is a common surface-mount device designed and manufactured by Draco Components USA. It has a working voltage range of 28V-431V DC, and a maximum junction temperature of 175°C. The device also has a maximum discharge current of 30A for up to 8/20 μs (40A for 8 μs alone). The V10E385 also has low capacitance, making it suitable for applications that require high switching speeds.

The V10E385 is commonly used in various commercial and consumer applications, such as telecom and datacom products, computers, network equipment, and consumer electronics. In addition, this device is also used in automotive systems, HVAC, and industrial applications.

The main working principle of the V10E385 is to absorb and dissipate transient surge voltage. The V10E385 is designed to be bidirectional and is made up of a dielectric disk and two electrodes. The electrodes are connected to an arc gap, and when a transient voltage greater than the clamp voltage of the device is applied, the arc gap conducts the current, and the current is absorbed by the dielectric disk, thereby dissipating the transient surge voltage. After the transient surge voltage is dissipated, the current in the arc gap is switched off and the arc gap reverts to its open state.

Another benefit of the V10E385 is the variety of environmental and mechanical protection it provides. The V10E385 is constructed in a leadless chip carrier (LCC) package and is designed to be compatible with standard surface mount technology. It is also RoHS compliant and features high temperature solder reflow. The device is resistant to both mechanical and environmental stresses, such as shock, vibration, and humidity.

In conclusion, the V10E385 is a common surface mount device that provides voltage transient protection and protection against mechanical and environmental stresses in a variety of electronic systems. The device is designed to absorb and dissipate transient surge voltage and protect electronic systems from unexpected voltage transients. The V10E385 is an ideal device for protecting telecom and datacom products, computers, network equipment, consumer electronics, automotive systems, HVAC, and industrial applications.

The specific data is subject to PDF, and the above content is for reference