V10E625PL1B5

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Transient Voltage Suppressors (TVS) and Metal Oxide Varistors (MOVs) are two of the most common Non-Polar devices that are used to protect devices from voltage spikes and electrical transients. The V10E625PL1B5 Varistor is one such device.

Varistors are used to protect against surges in electrical systems, and are made of a metal-oxide material that functions as a voltage-dependent resistor. When an over-voltage occurs, the varistor\'s resistance drops significantly, allowing current to flow through the device and clamping the voltage. The V10E625PL1B5 Varistor has a nominal maximum voltage of 625V, with a peak pulse current of 10kA.

MOVs are also used in surge protection, similar to varistors. MOVs are composed of a certain type of metal oxide material, and when an over-voltage occurs, they act like a switch, allowing current to flow through to keep the voltage at a safe level. The V10E625PL1B5 MOV has a maximum voltage of 625V, with a peak pulse current of 10kA.

V10E625PL1B5 Varistors and MOVs are commonly used in a variety of applications, from medical equipment and industrial applications to consumer electronics. They are used in devices that could be damaged by unexpected surges in voltage or current, and are used as a means of providing protection. In medical equipment, they are used to protect equipment such as EEG machines, CAT scans and x-ray machines from power surges. In industrial applications, they are often used in control and automation systems, as well as other devices and equipment that are exposed to high levels of electrical transients. In consumer electronics, they are used to protect against unexpected power spikes and surges.

Varistors and MOVs work by absorbing the energy from incoming transient spikes, limiting their speed and duration to safe levels. This ensures that the equipment is protected against damage from unexpected power surges. If the incoming voltage exceeds the varistor or MOV’s rating, it will act like a short circuit, allowing the current to flow through to the ground, limiting the voltage to a safe level. When the surge dissipates, the MOV or varistor returns to its normal resistance, allowing the normal flow of current.

The V10E625PL1B5 Varistor or MOV is a low-cost solution for providing transient protection in a variety of applications. They offer protection against surges up to 625V, and can handle peak pulse currents up to 10kA. This makes them an ideal choice for applications where protection against voltage transients is necessary.

The specific data is subject to PDF, and the above content is for reference