V10E510 Circuit Protection

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The V10E510 belongs to a family of Voltage Dependent Resistors (VDRs) commonly referred to as Transient Voltage Suppressors (TVSs). These devices provide protection against electro-static discharge, electrical transients, and surges in sensitive electronic environments. The TVS is composed of a metal oxide (MOV) or silicon semiconductor material with metal contacts. The V10E510 is specially designed for high-frequency transients such as Fast Transient Response (FTR) or Electro-Static Discharge (ESD).

V10E510 applications include circuit protection in personal computers, test and measurement equipment, motor controllers, power management systems, interference suppression circuits, audio-visual devices, and industrial controllers.

The V10E510 device is intended to protect one or more lines from overvoltage transients such as Electro-Static Discharge (ESD) events. The device is designed to clip high frequency noise spikes and to shunt unwanted transient voltages to ground. The device can be used as an ESD filter, or a surge suppressor in order to protect expensive or delicate electronics from damaging overvoltage transients.

The typical working principle of the V10E510 is to sense the voltage across the device. When an overvoltage transient is above the clamp voltage, the device will turn “on” and clamp the transient to its holding voltage. The device will then dissipate the current through the MOV metal-oxide varistor. When the transient exceeds the clamping voltage, the device will begin to dissipate the current at a rate that is rated in joules.

The V10E510 is connected between two points to provide noise filtering and protection from overvoltage transients. This ensures that the signal passes through the device unaffected by the transient. The device has low capacitance, low series resistance, heighten transient immune, low thermal impedance, and low triggering voltage. The device also has a breakdown voltage that is below the system deployed voltage in order to protect from overvoltage fault conditions.

The V10E510 product line is designed to provide high-frequency transient voltage protection in noisy environments. Its robust design, high breakdown voltage, and wide mounting varieties make it an ideal choice for high-frequency ESD protection, as well as input/output protection of power electronics.

The specific data is subject to PDF, and the above content is for reference