V14E250PL1T1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

TVS-Varistors, MOVs are acronyms for transilient voltage suppressors. MOVs, or metal oxide varistors, are two-lead electrical components that can protect circuits from electrical transients. They are widely used in industrial, commercial, and consumer applications, including computer hardware, power supplies, telecommunication systems, industrial controllers, and high-end audio/video systems. The V14E250PL1T1 is an example of a MOV and it is suited for a variety of applications.

V14E250PL1T1 Application Fields and Working Principle

The V14E250PL1T1 is an encapsulated MOV designed for overvoltage protection on single-phase power lines up to 600 volts. This type of protection is used to keep connected equipment from damage due to circuits where the supplied voltage has exceeded the Maximum Allowable Voltage rating (MAV). The V14E250PL1T1 has a peak pulse power rating of 2.5kV, an isolation resistance of 1000MΩ min, and a dissipation constant of 10mW/°C.

MOVs generally work by diverting transient overload voltages away from sensitive items, such as microprocessors or other sensitive components. When the voltage exceeds a particular level, the MOV will conduct the excess voltage, providing a path for the energy to dissipate away. This prevents the circuit or equipment from receiving a dangerous voltage spike.

The V14E250PL1T1 is integrated within the power system to provide surge protection for the connected load. It is suitable for use in a wide range of applications, including automotive, industrial, and consumer electronics, and is well suited for time-dependent overvoltage applications. It is also compliant with UL49-110 standards.

When a voltage surge appears on the line, the MOV responds to the overvoltage and is designed to operate within a predetermined Voltage Range. The MOV then acts as a short circuit between the positive and negative DC lines, thus providing a low impedance path for the surge to dissipate. Once the voltage level drops below the MOV rated voltage, the MOV becomes non-conductive again, allowing the circuit to be restored to its original condition.

The V14E250PL1T1 has a MOV response time of 10μs, which allows it to effectively protect against transients in the system. The device is also able to dissipate a maximum of 150J of energy, which is the maximum amount of energy that can be safely discharged into the environment. The MOV is also able to withstand up to 10,000 peak current pulses, ensuring effective protection over the life of the equipment.

Due to its low profile size, the V14E250PL1T1 is suitable for applications where space is limited. It is available in a variety of packages to suit the application requirement and the range of different operational temperature ratings of the device also ensures that it is suitable for a range of operating environments. The V14E250PL1T1 is also UL rated and IEC standard approved.

In summary, the V14E250PL1T1 is a robust and effective surge protector, suitable for use in a variety of applications. It is capable of dissipating peak power of 2.5kV and is UL listed and IEC standard approved, making it a trusted choice for a wide variety of applications.

The specific data is subject to PDF, and the above content is for reference