V14E42AUTO

V14E42AUTO is an electro-mechanical voltage protection device used in electrical and electronic equipment. It is part of the TVS (Transient Voltage Suppression) - Varistors, MOVs (Metal Oxide Varistors) family and is designed to protect sensitive electrical equipment from a variety of overvoltage or surge transient conditions.V14E42AUTO is specifically designed for use in automotive environments where the electrical demands can vary greatly. This device is made of a variety of components, including an electrolytic capacitor, an MOV (metal oxide varistor) and a mechanical switch. The MOV provides a path for the transient current, while the switch will mechanically break the circuit when the device is subjected to a high voltage or surge. This mechanical switching action provides additional protection against unwanted high voltage or surge.The main components of the V14E42AUTO device are the MOV (metal oxide varistor) and the mechanical switch. The MOV is made up of a layer of zinc oxide granules sandwiched between two other layers of metal. This metal layer is connected to the ground, while the zinc oxide granules form a semiconductor layer, which has a very high resistance to electric current.When the device is exposed to an overvoltage condition, the MOV will act like a resistor and the current will be diverted away from the load. The switch will then break the connection to the load, thus protecting the sensitive electronics from damage.The V14E42AUTO is designed to be used with 50 Hz or 60 Hz AC power applications. The device has been designed and tested to withstand transients up to 600 volts AC. As an additional safety measure, the MOV will also act as a circuit breaker, disconnecting the load when the surge is greater than 600 volts AC.The V14E42AUTO works by clamping the overvoltage transient on the line to a lower, more acceptable voltage. This is done by diverting part of the surge current to ground, thereby reducing the voltage across the protected equipment, thereby providing protection from overvoltage transients.The V14E42AUTO device is an excellent device which can effectively protect a sensitive electrical or electronic equipment from overvoltage or surge transients. It is designed to be used in a variety of applications, such as automotive, industrial, commercial, and residential. It is a cost-effective protection device which is both reliable and effective.