V14E60P

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

TVS (Transient Voltage Suppressors) and Varistors (including Metal Oxide Varistors, MOVs) are two types of components used to protect electronic circuits from surges in transient voltage. These surge protection components are divided into two categories - unidirectional and bidirectional. Unidirectional devices clamp voltage below a predetermined voltage level. On the other hand, bidirectional devices protect from both overvoltage and undervoltage surges in both directions. In this article, we will discuss the application field and working principle of a V14E60P device – a bidirectional dual TVS and MOV combination device.

The V14E60P is used for surge protection in a wide variety of applications, such as automotive, industrial, consumer and telecom. It is a dual device comprising of one TVS and one MOV. The TVS is used to protect circuits from ESD, EFT, Surge Protection and lightning strikes, while the MOV is used for bulk capacitance to suppress high frequency noise. The V14E60P combines the protection of two devices in a single package.

The V14E60P device has a working voltage range of 6V-40V, with a maximum absolute peak pulse current rating of 8.8A (10/1000μs) and a peak pulse power dissipation rating of 180W (8/20μs). Its working temperature range is -40°C - 125°C and it is designed to meet the AEC-Q101 standard for Automotive Applications. The V14E60P device also features a duals / Stresses technology, which provides two distinct levels of surge protection up to a peak pulse current of 20A.

The V14E60P uses an advanced dynamic clamping technology to provide both TVS and MOV protection. The TVS section of the device is designed to clamp voltage at around 60V, which is much lower than the breakdown voltage of standard MOVs. This provides an extra layer of protection from surges and allows for safe operation of the circuit. The MOV section of the device operates by diverting surge current away from the protected circuit to the grounded source. This helps to protect against overvoltages and reduce EMI/RFI interference. Furthermore, the V14E60P has a built-in fuse to protect the protected circuit from overloads and short circuits.

In summary, the V14E60P is a dual TVS and MOV device that provides up to 8.8A of peak pulse current and is designed for a wide range of applications. It features advanced dynamic clamping technology, which provides two distinct levels of surge protection and a built-in fuse to protect the protected circuit from overcurrents. The V14E60P also meets the AEC-Q101 standard for Automotive Applications and is designed to operate over a wide temperature range.

The specific data is subject to PDF, and the above content is for reference