V1D1G66B-00000-000

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Rocker switches, such as the V1D1G66B-00000-000, are a type of manual switch often found in applications that require frequent on/off operation, such as those controlling motor speeds, light dimmers, and more. When you press this type of switch, it forces electrical contact between two contacts, and energizes the circuit. They are typically made up of a snap action mechanism surrounded by a plastic housing, designed to easily snap between two positions.

The rocker switch is available in a variety of shapes, sizes, and colors, and also in different levels of protection. The most common type is the single-pole, double-throw (SPDT) switch, which enables two circuits to be independently controlled by one switch. Rocker switches also come in two-pole versions, which could control two independent circuits simultaneously, or with a three-pole switch, which could operate three circuits at once.

When it comes to the operation of the V1D1G66B-00000-000, there are typically two modes – latching and momentary. In latching mode, the switch stays in the position it’s been placed until it’s pressed back in the opposite direction. On the other hand, momentary mode allows the switch to stay in one position, either on or off, depending on the direction it was last pushed.

The V1D1G66B-00000-000 is well suited for many applications such as industrial equipment, control panels, lighting, and dispensing systems. Its precision and durability make it suitable for a wide range of environments. It is usually designed to support currents up to 2A, with a maximum voltage of 250V and a dielectric strength of 1500VAC.

When it comes to working principle of the V1D1G66B-00000-000, the switch contains two predetermined pole points — a common point accompanied by two switchable throws. The spring-loaded rocker arm moves forward or backward to make contact with either or both of the throws, thus energizing the circuit. When you press one side of the switch, the rocker arm is forced to move forward, engaging the point and completing the circuit. Similarly, pressing the other side of the switch will move the rocker arm back, thus breaking the circuit.

Rocker switches, such as the V1D1G66B-00000-000, are reliable and easy to use. They are designed to offer a simple and cost-effective method for controlling a variety of applications, and in some cases, even advanced features such as light dimming or two-speed motor control.

The specific data is subject to PDF, and the above content is for reference