V20E275PL1T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

A varistor or voltage-dependent resistor (VDR) is an electrical component having a nonlinear, non-ohmic current-voltage characteristic. It is a form of resistor whose resistance is a function of applied voltage, rather than remaining Constant like a standard resistor. Varistors are typically constructed using a composition of metal oxide, sandwiched between two electrodes. They are used in a wide variety of applications including overvoltage protection for electronic circuits, voltage regulation and lightning protection.

The V20E275PL1T Varistor is a surface-mountable varistor designed for a variety of applications. It features low capacitance, high insulation voltages and high surge capability. The device is capable of continuous operation at 275 volts and has a maximum clamping voltage of 1100 volts. The device offers low leakage current under normal operation, and is ideal for use in high-frequency applications.

The V20E275PL1T is designed for use in TVS applications. TVS (transient voltage suppressors) protect sensitive circuitry from the effects of electrical transients or spikes caused by power surges. These transients can be generated by a variety of sources, including transient events from the utility power grid. The V20E275PL1T\'s ability to handle these spikes makes it an ideal choice for protection against power surges.

The V20E275PL1T is also suitable for use in other applications, including voltage regulation and lightning protection. In voltage regulation applications, the V20E275PL1T can be used to limit the voltage output of a power supply. When configured in a low-pass filter, the V20E275PL1T can be used to filter out high-frequency noise from a circuit, providing a stable, low-noise output. In lightning protection applications, the V20E275PL1T can be used to clamp the peak surge voltages caused by direct lightning strikes, protecting sensitive circuitry.

The V20E275PL1T is constructed of metal oxide sandwiched between two electrodes. When a voltage is applied to the device, the resistance of the metal oxide decreases, allowing current to flow more easily. When the voltage exceeds the maximum clamping voltage of 1100 volts, the resistance of the metal oxide increases, clamping the voltage and limiting the current flowing through the device. This limits the voltage on the protected circuitry, and provides overvoltage protection.

In conclusion, the V20E275PL1T Varistor is a versatile device suitable for use in a variety of TVS applications. It is capable of handling high surge voltages, and can be used for overvoltage protection, voltage regulation, and lightning protection. The device is constructed of metal oxide, and provides reliable protection against electrical transients.

The specific data is subject to PDF, and the above content is for reference