V28B28H150BG3

Current - Output (Max):	5.36A
Base Part Number:	V28B28H150
Size / Dimension:	2.28" L x 2.20" W x 0.50" H (57.9mm x 55.9mm x 12.7mm)
Package / Case:	9-DIP Module
Mounting Type:	Through Hole
Efficiency:	80.9%
Operating Temperature:	-40°C ~ 100°C
Features:	OVP, UVLO
Applications:	ITE (Commercial)
Voltage - Isolation:	3kV
Power (Watts):	150W
Series:	MINI
Voltage - Output 3:	--
Voltage - Output 2:	--
Voltage - Output 1:	28V
Voltage - Input (Max):	36V
Voltage - Input (Min):	9V
Number of Outputs:	1
Type:	Isolated Module
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC DC Converters

A DC-DC converter is a device that converts a direct current (DC) input voltage to a different DC voltage output. Instead of AC power, DC-DC converters use electronic switching circuits to convert the DC voltage up or down. Based on the input and output, DC-DC converters usually come in the form of step-up (boost), step-down (buck), and inverting (inverting or buck/boost).The V28B28H150BG3 is a DC-DC converter for use in applications such as industrial electronics, telecommunications, energy storage, LED lighting, automotive electronics, consumer appliances, portable electronics and medical electronics. This device is designed to provide a regulated output voltage and current for applications with input voltages from 8V to 28V, and output voltages from 1.8V to 15V.The V28B28H150BG3 is comprised of two stages of DC-DC conversion, a step-down (buck) stage and a step-up (boost) stage. The buck stage uses pulse width modulation (PWM) to regulate the output voltage and current by varying the duty cycle of the applied pulses to the device. The boost stage is used to increase the voltage of the output to the desired level.The input voltage is applied to the converter’s rectifier circuit, which converts the AC voltage to DC voltage. This DC voltage is then fed to the buck converter, which then converts the low-voltage DC to a higher-voltage DC voltage. This higher voltage is then sent to the boost converter which then outputs the regulated voltage.The V28B28H150BG3 works by controlling the output of the buck converter\'s PWM signal, which is proportional to the input voltage, by a signal from the on-board microcontroller. This control signal is used to adjust the duty cycle of the PWM signal and ultimately regulate the output voltage and current. The boost section takes the regulated voltage from the buck stage and boosts it to the desired output voltage.The V28B28H150BG3 offers a wide range of features, such as thermal protection, over-voltage protection, under-voltage protection, short circuit protection, over temperature protection, and over current protection. These features ensure that the device operates within safe parameters and that it is protected from damage due to excess current or temperature.The V28B28H150BG3 is a robust and reliable solution for applications requiring a regulated output voltage and current. This device offers superior performance, efficiency, and protection in a wide range of industrial and consumer applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description