V40DM120CHM3/I

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The V40DM120CHM3/I is a part of a broader family of bridge rectifier arrays. Typical application fields for bridge rectifier arrays are AC-DC power supplies, DC-DC converters, and inverter circuits. Bridge rectifier arrays allow for the conversion of an alternating current (AC) to direct current (DC), and may used to either step-down or step-up the voltage level. The purpose of the V40DM120CHM3/I is to provide an economical and efficient solution for these applications.

The V40DM120CHM3/I is a three-phase bridge rectifier array. It is composed of four diodes in a single package. It consists of four parts: an anode, an anode return pin, a cathode and a cathode return pin. The anode is connected to the positive terminal of the AC voltage source, the anode return pin is connected to the negative terminal of the AC voltage source, and the cathode is connected to the load. The cathode return pin is connected to ground. The package has a maximum operating temperature of 125°C. The device also features high isolation performance and high surge current strength.

The V40DM120CHM3/I has a breakdown voltage of 1200V and a maximum RMS surge current of 40A. This allows for operation at a wide range of voltages, reducing the amount of stress on the components when higher voltages are used. This is especially beneficial for applications in which the voltage levels may vary over time. The device is capable of continuous reverse power of up to one kilowatt and can handle up to 80A surge current.

The working principle of bridge rectifier arrays is based on the principle of alternating current conversion. As the alternating current is fed into the device, the diodes allow it to pass through, allowing the device to convert the AC to DC. By connecting the anode to the positive terminal of the AC voltage source, the anode return pin to the negative terminal of the AC voltage source and the cathode to the load, the entire device forms a bridge rectifier. The bridge rectifier provides the necessary path for electric current to flow from one side of the bridge rectifier to the other, converting the AC to DC. The return pin is connected to ground in order to provide a safe path for electric current to return to its source.

The V40DM120CHM3/I is an excellent choice for applications that require the conversion of AC to DC. Its high surge current strength and breakdown voltage ratings make it a reliable choice for applications ranging from low-voltage AC-DC power supplies, DC-DC converters, and inverter circuits.

The specific data is subject to PDF, and the above content is for reference