V430RA8X2749 Circuit Protection

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Transient voltage suppressors (TVS) are components of electrical circuits that are commonly used to protect semiconductor devices from overvoltage transients. TVS components are also used to protect against open-circuit or short-circuit faults. Varistors, MOVs, and gas discharge tubes (GDTs) are the most common types of TVS components.

The V430RA8X2749 is a metal oxide varistor (MOV) that is used to limit surge voltages by creating a low impedance path for overvoltage transients. This varistor is designed specifically for applications with a higher power requirement such as appliance, industrial, and automotive. The V430RA8X2749 is a bidirectional varistor that is able to protect against AC and DC voltages. It has an operating voltage range of 8 to 27 VDC and a clamping voltage of 420V at 9A. The varistor also has a peak surge current rating of 45A.

The V430RA8X2749 works by using its capacitive capacitance to absorb surges and energy transients in a circuit. The varistor is composed of sintered zinc oxide grains, which have a non-linear current-voltage characteristic. This means that when a surge voltage is applied, the current through the varistor increases quickly, which causes a sharp voltage drop across the varistor. This in turn reduces the amount of current in the circuit, limiting the amount of damage. The varistor also acts as a safety device, as it will trip and disconnect the circuit if the voltage exceeds the specified limit.

In addition to its surge voltage suppression capabilities, the V430RA8X2749 varistor also has excellent thermal capability. It is able to dissipate large amounts of heat, thus limiting the possibility of damage caused by overheating. The varistor also has a high reliability and can withstand mechanical shock and vibration.

The V430RA8X2749 is designed for applications where a higher power capability and improved thermal stability are needed. It is suitable for use in both commercial and automotive applications, as well as in power supplies, motor control applications, LED lighting, and CCTV. The varistor is also suitable for use in a wide range of consumer electronics devices.

The V430RA8X2749 is a fast-acting, reliable, and cost-effective solution for surge protection in electrical circuits. It has excellent surge protection capability, high reliability, and excellent thermal performance. It is also an ideal choice for use in a wide range of consumer electronics devices and automotive applications.

The specific data is subject to PDF, and the above content is for reference