V480LT80BPX10

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

TVS-Varistors, MOVs are electronic components designed to protect sensitive circuits in electrical and electronic systems against overvoltage and electrical transients. TVS-Varistors, MOVs are designed to provide limited electrical power dissipation capability, and are commonly used in system overload, overvoltage protection, and surge protection. The V480LT80BPX10 is a mov-varistor that provides protection against overvoltage transients.

General Overview
The V480LT80BPX10 is designed for use in equipment susceptible to over-voltage transients. It is suitable for use in industrial, telecommunications, computer, automation and automotive applications. It is designed to provide protection against over-voltages of up to 480 volts, with an operating voltage range between 4.5 volts and 80 volts.

Application Field
The V480LT80BPX10 is designed for use in equipment susceptible to over-voltage transients, such as computers, telecommunications, industrial, and automotive equipment. The device can be used for both industrial and automotive applications, including automotive components such as relays, switches, and power supplies.

Working principle
The V480LT80BPX10 is a non-linear symmetrical voltage clamping device, consisting of an MOV element and a varistor element. The V480LT80BPX10 is designed to protect against transient overvoltages in both directions, by providing a low-impedance, non-linear conductive path. The device dissipates the transient energy, quickly connecting the clamped voltage to ground. The energy is dissipated as heat in the MOV or varistor element, and the voltage is clamped to a safe operating level.

The device consists of two discrete components; an MOV element and a metal oxide varistor (MOV) element. The MOV element is designed to conduct high-frequency energy, which is then dissipated as heat. The MOV element will conduct the excessive transient energy, preventing damage to the components connected to it. The varistor element is designed to conduct lower frequency energy. The varistor element will conduct and dissipate the energy through conduction.

The V480LT80BPX10 is a non-linear device, and its UL rating is 480V. The device is a DC biased bi-directional transient protection device, and it must be used in series with the sensitive component being protected. It is designed to protect electronic components from damaging transients by clamping the severe positive and negative transient overvoltages to a safe operating level. The device will clamp the overvoltages to an acceptable level of 4.5V to 80V, dissipating the energy as heat.

The V480LT80BPX10 is suitable for a wide variety of industrial and automotive applications, providing protection against overvoltage transients. It is a reliable device, designed to operate without generating spurious emissions, and providing protection against transients for up to 480 volts.

The specific data is subject to PDF, and the above content is for reference