V510LU80BPX2855

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Today, the V510LU80BPX2855 is a type TVS - Varistors, MOVs that is gaining wide use for its many desirable qualities. This article will provide an overview of the application field and working principle of V510LU80BPX2855.

The application field of V510LU80BPX2855 is broadening. The V510LU80BPX2855 is ideal for use in high voltage and current protection circuits. It is also effective in protecting circuits from lightning related overvoltages. The V510LU80BPX2855 offers many advantages for a full-wave bridge, including superior pulse performance, a low equivalent series resistance (ESR), and excellent clamping performance that allows for high energy absorbtion. Additionally, its high peak Pulse Power Dissipation meets increasing requirements for surge protection.

The primary element of V510LU80BPX2855 is a zinc-oxide varistor with two metal oxide varistors (MOVs) connected in serial with negative temperature coefficient thermistors in parallel. In general, a MOV has a P and N layer combination in which the first layer acts as an anode and the second layer acts as a cathode. During surge protection, MOVs reduce the effect of high-energy overvoltage disturbances, providing clamping protection to reduce the voltage to a safe level. The varistor has a higher resistance level than MOVs, offering excellent protection from standard line voltage spikes. During surge protection, the varistor is typically used in combination with an MOV to reduce or limit the voltage of the transient voltage surge. The negative temperature coefficient temperature sensor helps protect the circuit from any overcurrent conditions by reducing the current and preventing any over-voltage.

V510LU80BPX2855 is equipped with a linear switching circuit that uses the voltage drop generated by the voltage regulator to limit the output current. This technology compensates for the input voltage, which means that the output current remains unchanged regardless of the input voltage fluctuations. This prevents the over-current which often occurs during short-time over-voltage events and enhances the surge suppression ability of the device.

V510LU80BPX2855 also has the ability to regulate the voltage and current. The MOVs, zinc oxide varistor, and thermistor act as negative voltage feedback components to regulate the voltage across the MOVs, zinc oxide varistor, and thermistor electrodes. Current is limited through a sense resistor, composed of the load resistor, and ZVP-type diode, which are connected in series. When the voltage across the load increases, the load current increases as well and the voltage across the ZVP-type diode increases. This causes the diode to discontinue operation, limiting the output current. When the current falls below the set value, the reverse bias voltage of the diode decreases, allowing the current to flow again.

The combination of these three components makes V510LU80BPX2855 a perfect choice for protecting your circuits from overvoltage and overcurrent. Its superior performance and ability to regulate voltage and current make V510LU80BPX2855 an ideal choice for a variety of applications. Every device is tested multiple times and its performance is ensured before sale, making V510LU80BPX2855 a dependable and valuable tool for circuit protection.

The specific data is subject to PDF, and the above content is for reference