V60170G-M3/4W

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The V60170G-M3/4W is a rectifier array combining four individual silicon diodes into a single package. Even though they share the same general properties, these four rectifiers operate in different ways, depending on the application field. The most common use is general-purpose power electronics rectification in the low-voltage domain.

The V60170G-M3/4W uses a Schottky diode array to convert ac power into dc current. It works by allowing current to flow in one direction, blocking the current from flowing in the other direction. Because of its unique construction, the Schottky diode array is especially useful for high-speed switching applications, as it exhibits very low switching times and can efficiently handle high-frequency signals.

If used in an AC/DC power conversion, this rectifier array will create a full-wave rectified output from the input AC power source. The current will flow through the Schottky diodes in a forward direction and reverse direction, allowing both positive and negative values to occur at the output. This is what creates the full-wave rectified output and allows the device to be used in power conversions.

These rectifier arrays can also be used to protect circuits by limiting and injecting overvoltage protection directly into the circuit. This is done by creating a voltage clamping mechanism. When the input voltage exceeds the voltage rating of the clamping device, the current will be diverted, either to ground or to the supply rails. This will prevent the voltage from reaching dangerous levels and also protect the circuit from any runaway current.

The V60170G-M3/4W is also used in high-speed applications, where the desired output current needs to be generated quickly. This is achieved by using high-frequency switching, where the diodes are switched between full conduction, partial conduction, and zero conduction. This allows for the current to be generated rapidly, achieving the desired effect with minimal energy consumption.

In addition to the general use applications, the V60170G-M3/4W rectifier array can also be used in high-voltage applications, where a full-wave bridge rectifier configuration is required. This device is capable of providing voltages up to 500 volts, making it suitable for use in high-voltage power electronics. The full-wave bridge rectifier is especially useful in applications where average load current needs to be maintained during varying load conditions, such as in the case of motor control or power supply design.

Overall, the V60170G-M3/4W rectifier array is an excellent choice for a wide variety of applications. Its combination of low-voltage, high-speed switching, voltage protection, and high-voltage capabilities make it highly versatile, allowing it to be used in a variety of power electronics applications.

The specific data is subject to PDF, and the above content is for reference