V625LA80CPX2855

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The application fields of V625LA80CPX2855 and its working principle can be broadly classified into TVS (Transient Voltage Suppressors), MOVs (Metal Oxide Varistors) and Capacitor Leakage Suppressors.

TVS (Transient Voltage Suppressors)

Transient Voltage Suppressors, or TVS, are protective components used during surges caused by electrostatic discharge (ESD), lightning strikes, or inductive switching, preventing electrical appliances and circuit boards from damage. Use of a TVS in an electronic system effectively dissipates transient voltage to its reference ground as heat continues to accumulate until the voltage returns to a normal level. TVS Diodes such as the V625LA80CPX2855, for instance, are a type of semi-conductor device that limits overvoltage transients in peak pulse according to their nonlinear resistance characteristics.

The working principle of TVS involves a junction breakdown phenomenon which occurs due to exceeding a certain applied voltage at the junction point. In the case of the V625LA80CPX2855, this is when the voltage reaches 600V. When the protective threshold voltage of the TVS is reached, a high current flow which is much higher than ambient operating current is triggered, dissipating the energy to the reference ground point. This process has a relatively short duration of a few nanoseconds, typically much shorter than the time it takes for the excess voltage to travel through the back up protection components. Therefore, the excess energy is dissipated in the TVS, instead of being sent further through the sub-circuit.

MOVs (Metal Oxide Varistors)

Metal Oxide Varistors, or MOVs, are transient voltage suppressors which act by clamping the voltages. They are made by mixing metal oxide powder with a variety of other additives. When the applied voltage becomes high enough, avalanche breakdown process occurs in the varistors, causing it to suddenly increase its conductivity. This allows the current to pass through the varistor and is discharged to the ground.

MOVs work similarly to TVS by providing overvoltage protection for electrical and electronic systems. The V625LA80CPX2855 is equipped with a large metal oxide junction which allows it to rapidly dissipate large amounts of surge energy to the ground. This ensures that the system and device is protected from high surge voltages.

The working principle of the MOVs involves a clamping voltage, wherein when the applied voltage passes through the clamping voltage, or breakdown voltage, it will cause a sudden increase in current flow. This in turn causes the current to be discharged to the ground, which excess energy is dissipated in the MOVs instead of traveling further through the circuit.

Capacitor Leakage Suppressors

Capacitor Leakage Suppressors are used to protect against high voltage transients, as well as to act as a filter for high frequency AC signals. This is achieved through the combination of capacitors and inductors connected together. The V625LA80CPX2855 is capable of preventing AC line voltage from being affected by transient surges by providing a low impedance path to ground during transients, while allowing higher impedance paths for AC signals.

The working principle of capacitor leakage suppressors is to pass high frequency AC signals through the capacitor, while absorbing any transient surge. The inductor provides a magnetic field, causing any high voltage transients to be grounded instead of passing through the capacitor. This ensures that critical components and circuit boards are protected from damage caused by surges.

The specific data is subject to PDF, and the above content is for reference