VBO20-14NO2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes are used in many different applications. Bridge rectifiers are one example, where a single diode is used in combination with a number of other diodes to form a rectifying bridge. The VBO20-14NO2 is one such example, used in a number of applications. This article will discuss the application field and working principle of the VBO20-14NO2.

The VBO20-14NO2 is a single-phase full wave bridge rectifier. It is a wide range bridge rectifier with an input voltage range of 8 to 34V AC. It can be used in a number of different applications, including DC power supplies, battery chargers and rectifiers of DC motors. The VBO20-14NO2 is also suitable for powering lighting loads, such as incandescent, halogen, and LED lamps.

It consists of four diodes connected in a bridge configuration. Two of the diodes are arranged in forward bias, while the other two are arranged in reverse bias. This allows for the rectification of AC signals, turning them into DC signals. When the AC input is positive, the two forward biased diodes conduct, allowing current to flow from the AC source to the load. When the AC input is negative, the two reverse-biased diodes conduct, allowing current to flow from the load to ground.

The VBO20-14NO2 also includes a semi-conductive plate, which is used as a heat sink. This plate conducts and dissipates heat away from the diodes, allowing them to operate at lower than normal temperatures. This heat sink also helps to keep the output voltage of the rectifier constant, regardless of the amount of current entering and exiting the circuit.

The VBO20-14NO2 is capable of operating up to a maximum current of 14A, with a surge that can reach up to 20A. The voltage drop across the bridge rectifier depends on the amount of current flowing, but typically has a maximum of 1.4V. The VBO20-14NO2 is also capable of operating in temperatures ranging from -20°C to +85°C.

The VBO20-14NO2 is a robust and reliable bridge rectifier, suitable for use in a variety of applications. Its use is primarily for turning AC signals into DC signals, allowing direct current to be used for powering different loads. Its semi-conductive plate helps to keep the output voltage constant, and its wide range of operating temperatures allows for its use in a variety of environments.

The specific data is subject to PDF, and the above content is for reference