VBO25-16NO2

Series:	--
Packaging:	Bulk
Part Status:	Active
Diode Type:	Single Phase
Technology:	Standard
Voltage - Peak Reverse (Max):	1.6kV
Current - Average Rectified (Io):	38A
Voltage - Forward (Vf) (Max) @ If:	1.36V @ 55A
Current - Reverse Leakage @ Vr:	300µA @ 1600V
Operating Temperature:	-40°C ~ 150°C (TJ)
Mounting Type:	QC Terminal
Package / Case:	4-Square, FO-A
Supplier Device Package:	FO-A

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

The VBO25-16NO2 is a bridge rectifier, which consists of four semiconductor diodes. This type of bridge rectifier is used in a wide variety of applications, from household light dimmers to high-power DC motor speed control. This article will discuss the common applications for this bridge rectifier and its general working principle.

Applications

The main applications for the VBO25-16NO2 include AC power rectification, AC motor speed control, AC current rectification and DC load switching.

The VBO25-16NO2 is used in AC power rectification, to convert alternating current (AC), which has an alternating polarity, into direct current (DC). This type of rectification is used in battery chargers, inverters and power supplies. The rectified AC signal can be used to smoothly vary the output voltage, by changing the width of the signal pulses.

The VBO25-16NO2 is also used in AC motor speed control, to regulate the speed of DC motors. By controlling the voltage supplied to the motor, the speed of the motor can be varied. This type of speed control is commonly used in washing machines, vacuum cleaners and other household appliances.

The VBO25-16NO2 is also used for AC current rectification, to convert AC signals into DC signals. This type of rectification is used to convert AC mains power into DC power for use in electronic circuits, such as laptop power supplies. The rectified DC signal can be used to precisely control the output voltage, by varying the frequency of the input AC signal.

Finally, the VBO25-16NO2 is used in DC load switching, to control the flow of DC current. This type of switching is used in motor controllers and other applications that require the switching of DC loads. By pulsing the DC load, the direction of current flow can be reversed, enabling the switching of high-power DC loads.

Working Principle

The VBO25-16NO2 bridge rectifier operates by allowing current to flow in one direction only, when an AC source is applied to the circuit.The bridge rectifier consists of four semiconductor diodes, arranged so that current can only flow in one direction. When an AC source is applied to the circuit, the diodes become forward biased and allow the current to flow through the circuit. However, when the polarity of the AC source reverses, the diodes become reverse biased and block the current, preventing it from flowing through the circuit. This type of rectification is known as a full-wave bridge rectifier.The bridge rectifier can also be used to provide a controlled rectified output voltage. By varying the frequency of the input AC signal, the average output voltage of the bridge rectifier can be adjusted, allowing for the precise control of the output voltage.

Conclusion

In conclusion, the VBO25-16NO2 bridge rectifier is used in a wide variety of applications, from household light dimmers to high power DC motor speed control. The bridge rectifier operates by allowing current to flow in one direction only, when an AC source is applied to the circuit. The rectified output voltage can be adjusted by varying the frequency of the input AC signal, enabling the precise control of the output voltage.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description