VBT4060CHM3/I

Series:	Automotive, AEC-Q101, TMBS®
Part Status:	Obsolete
Diode Configuration:	1 Pair Common Cathode
Diode Type:	Schottky
Voltage - DC Reverse (Vr) (Max):	60V
Current - Average Rectified (Io) (per Diode):	20A
Voltage - Forward (Vf) (Max) @ If:	620mV @ 20A
Speed:	Fast Recovery = 200mA (Io)
Current - Reverse Leakage @ Vr:	6mA @ 60V
Operating Temperature - Junction:	-40°C ~ 150°C
Mounting Type:	Surface Mount
Package / Case:	TO-263-3, D²Pak (2 Leads + Tab), TO-263AB
Supplier Device Package:	TO-263AB

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

The VBT4060CHM3/I is a rectifier array chip, widely used in a variety of applications that require the conversion of alternating current to direct current, the primary purpose of which is for power supply management. The chip comes in a truncated DIP package with a rated voltage of 600 Volts, a current rating of 3 Amperes, and a forward voltage drop of 0.7 Volts at a ambient temperature of 25 degrees celsius.

Applications

The VBT4060CHM3/I is ideal for use in applications such as Wind and Solar energy converters, Power Supplies, Automated Machines, Home Appliances and other devices where DC power is required. The chip can also be used in combination with a buck converter or voltage regulator in order to reduce Volt-Amps (VA) demands.The high surge current capabilities of the VBT4060CHM3/I make it suitable for use in peak current-driven applications such as load testing, engine cranking, motor control and starter motor applications.

Functionality and Design

The VBT4060CHM3/I consists of eight individual PIN rectifier elements, each of them having a peak current rating of 3A and a low forward voltage drop of 0.7V. The elements of the chip are connected in an array to ensure that the peak current and forward voltage drop remain consistent under various temperature and load conditions. The chip is also equipped with an overcurrent protection feature that limits the peak current to 3A. This safety feature helps to protect the chip from any internal or external damage caused due to excessive current passing through the chip. The VBT4060CHM3/I is equipped with built-in ESR (Equivalent Series Resistance) that allows it to handle surges and minor changes in the AC input without any significant voltage drops. The VBT4060CHM3/I has a temperature range of -55°C to +150°C and is able to operate in temperatures up to +125°C. The chip is also capable of withstanding voltage spikes up to 2kV, allowing it to operate under extreme environmental conditions.

Conclusion

The VBT4060CHM3/I is a versatile and efficient rectifier array chip ideal for use in a wide range of applications such as Wind and Solar energy converters, Power Supplies, Automated Machines, Home Appliances and other devices where DC power is required. The chip is equipped with an overcurrent protection feature and built-in ESR that enable it to handle peak currents and minor changes in input voltage without any issue. Moreover, its wide operating temperature range and high surge current rating make it a suitable choice for heavy-duty applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description