VC060318A400RP Circuit Protection

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Varistors are a class of passive electrical components which, unlike resistors, have a non-linear voltage-current behavior. The VC060318A400RP, also known as a Metal Oxide Varistor (MOV), is a type of metal oxide varistor which is primarily used for surge protection in a variety of applications. The VC060318A400RP is a surface-mount device (SMD) with a 3-terminal design, and its size is 6mm x 3.2mm x 1.8mm. When exposed to an over-voltage condition, it will clamp the voltage across it and then dissipate the energy as heat. In this way, the VC060318A400RP can protect sensitive components from damage due to over-voltage conditions.

The VC060318A400RP has a wide range of applications, primarily in the protection of devices against transient voltages. Common applications include surge protection in consumer electronics devices, power supplies, automotive systems, and industrial equipment. It can also be used to limit current flow in applications where there is a potential for short circuiting. The VC060318A400RP can operate over a wide voltage range, from 6V to 400V, and is rated to handle up to 350V peak pulse current.

The working principle of the VC060318A400RP is based on the varistor effect, which is the property of certain materials to suddenly increase their electrical conductivity when exposed to high voltage. The VC060318A400RP is made up of a sintered zinc oxide material, and when a voltage higher than its rated working voltage (VWR) is applied across it, the material becomes more resistive and begins to conduct current. The amount of current conducted is directly proportional to the applied voltage, and the VC060318A400RP will continue to conduct until the voltage is reduced back to the VWR level.

When the voltage is at the VWR level, the VC060318A400RP is in its resistive state, with its impedance tending towards infinity. In this state, the VC060318A400RP will block any current from flowing through it. This is because the current flowing through the device has less electrical potential than the VWR level. As a result, the VC060318A400RP in its resistive state is able to act as a surge protector for sensitive electronic components.

In conclusion, the VC060318A400RP is a Metal Oxide Varistor (MOV) which has a wide range of applications in the protection of devices against transient voltages. It is extremely small in size but is able to withstand up to 350V peak pulse current. Its working principle is based on the varistor effect, where it acts as a resistive element when the voltage is below its rated working voltage (VWR) and as a conductor when the voltage is higher than the VWR level. This enables the VC060318A400RP to effectively limit the flow of current when an over-voltage condition is present, and thus prevent damage to sensitive components.

The specific data is subject to PDF, and the above content is for reference