VC080509A200DP Circuit Protection

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

TVS (Transient Voltage Suppressor) and varistors (also known as Voltage Dependent Resistor (VDR) or Varistor) are two types of devices designed to protect critical electronic components from voltage transients. The two devices are designed with different mechanisms of defense, and therefore, they have their own specific functions. The VC080509A200DP is an example of a Varistor/MOV (Metal Oxide Varistor), a device that is designed to protect against voltage transients that occur in the range of 8V-509V.

The VC080509A200DP is designed with an upper limit at 509V and a lower limit at 8V. It has a high current and energy handling capacity and is designed for AC, DC, and pulse applications. The device is per GB/T 18081-2000, IEC 800, IEEE C62.45 standards, and UL 1449, CSA C22.2 safety standards. The VC080509A200DP has a capacitance of 12.5 pF and an inductance of 50nH.

The working principle of the Varistor/MOV is based on its ability to store energy and dissipate excess energy that can arise from transients. The Varistor/MOV works by sensing changes in the voltage at its terminals and then responding to those changes by dissipating or absorbing energy. In its normal operating state, the device is in a low-impedance state, meaning that it acts like a short circuit and does not allow current to flow through it. However, when there is a surge in the voltage, the Varistor/MOV senses this and increases its resistance, resulting in a higher impedance, and allowing some of the excess energy to dissipate or be absorbed. This helps protect the electrical component from the damaging effect of the surge.

The VC080509A200DP is designed for use in a wide variety of applications. Its wide voltage range makes it well-suited to uses in industrial electronics, telecom equipment, AC/DC regulators, and consumer electronics. Some examples of applications for the device include:

• Industrial electronics – The Varistor/MOV can be used as a protective component when other electrical components in the system are operating in higher than normal voltages.
• Telecom equipment – The device can be used to protect the telecom equipment from transients caused by lightning or power surges.
• AC/DC regulators – The device can be used as a surge protector, ensuring that sensitive electronic components in the regulator are protected.
• Consumer electronics – The device is well suited to protect consumer electronics from transient voltages, providing a safe and reliable environment for operation.

In summary, the VC080509A200DP is a Varistor/MOV designed with a wide voltage range, a high current and energy handling capacity, and is designed to meet safety standards such as UL 1449 and CSA C22.2. It is designed for AC, DC, and pulse applications including industrial electronics, telecom equipment, AC/DC regulators, and consumer electronics. The device works by sensing changes in the voltage at its terminals and then responding to those changes by dissipating or absorbing energy. This helps protect the connected electronic components from damaging voltage transients.

The specific data is subject to PDF, and the above content is for reference