VC080518A400DP Circuit Protection

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

TVS (Transient Voltage Suppressor) devices are an important series of Varistors, MOV\'s (Metal Oxide Varistors), or their combination, used in electronics to protect circuits from voltage transients or electrostatic discharges (ESD). Varistors are nonlinear resistors with very important electrical performance characteristics. They are also called Voltage Dependent Resistor (VDR) or Surge Absorber. The VC080518A400DP is an example of a Varistor device.

The VC080518A400DP is a low-cost varistor designed for surface mounted applications such as automotive, telecommunication, and other harsh environment applications. It features a surge current of 400A (8/20 μs wave) and an operating voltage range of 18V to 24V. The device can with stand a surge of 5kV and is designed to reduce ESD pulses from entering and damaging sensitive electronic components. A low capacitance and low-resistance combination makes it ideal for applications where a high ESD tolerance is required.

The working principle of a Varistor is based on the nature of its electrical characteristics. By definition, Varistors are nonlinear resistors that display a specific behavior depending on the applied voltage. When the applied voltage is lower than the Varistor’s rated breakdown voltage, the device behaves like an open circuit, and as such it does not allow any current to flow through itself. When the voltage increases to a certain level, which is known as its clamping voltage, the Varistor’s current will increase rapidly, making it act like an extremely low impedance or even short circuit. By doing this, the Varistor is able to limit current spikes and voltage transients, allowing the safe passage of the unwanted surge without damaging components.

The VC080518A400DP has a wide variety of applications in many different industries, including automotive, telecommunications, industrial, medical, and consumer electronics markets. The device is often used as a surge protector to prevent voltage transients from damaging sensitive components, such as logic ICs and other components. It can also be used to protect electronic circuits from EMI noise and electrical spikes. Additionally, it can also help to reduce signal cross talk in narrow band applications, such as automotive audio systems.

In summary, the VC080518A400DP is an important Varistor device. It is designed to protect electronic circuits from voltage transients or ESD and it works by rapidly increasing the device’s current when the voltage rises to the clamping voltage, making it behave like an extremely low impedance. The device has a wide range of applications, and it can be used to protect electronics from EMI noise and voltage transients in various industries, as well as reducing signal cross talk in automotive audio systems.

The specific data is subject to PDF, and the above content is for reference