VI40100CHM3/4W

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The VI40100CHM3/4W is categorized under Diodes - Rectifiers - Arrays, due to its utility as an efficient semiconductor device used primarily in the rectification of electrical current. It is a relatively simple device, used to convert alternating current (AC) to direct current (DC), with only two electrodes and no other active components. It is designed to quickly switch between allowing either of two polarities to be conducted, thus rectifying the input current and producing an output of pulsed DC voltage.

VI40100CHM3/4W is the second generation package of the widely employed VI40060CHM3/4W and simulates the equivalent structure and operation. Its voltage rate operating temperature ranges from -55˚C up to + 125˚C and its reverse conducting current is 350 mA. This makes it suitable for use in a variety of high-heat industrial and military applications.

It has been widely employed in various types of power conversion and rectifying circuits, acting as both a full and half-wave rectifier. It is often packaged in a TO-220 or TO-3P style plastic package, with a flip-chip interconnect atop for securing the device to the required substrate. As it is mechanically and thermally robust compared to its competitors, the VI40100CHM3/4W offers a reliable power conversion solution.

The VI40100CHM3/4W typically finds application in AC/DC power adapters, power rectifiers and converters, DC motors, audio amplifiers and switching power supplies. The device is also suitable for automotive applications, ranging from temperature control and motor control systems, to power steering and windshield wiper motors.

The VI40100CHM3/4W has a typical forward voltage drop of 2.1V at 25 A, a typical reverse saturation current of 20 μA, with a surge forward current rating of more than 50A. It has an AC power rating of 200W at a maximum ambient temperature of 85˚C. The device exhibits excellent reverse biasing, with a maximum and minimum typical leakage current that respectively stands at 10μA and 0.2μA.

In terms of the operating principle of the device, the VI40100CHM3/4W, like any other rectifier device, is designed with two distinct electrodes, The cathode and the anode. The device begins to conduct only when the anode receives a more positive voltage than the cathode. During the conduction phase, the current will flow from the anode to the cathode, provided there is a voltage applied across it. When the voltage across the device drops below a certain level, the device ceases to conduct, effectively switching off the current flowing.

The major difference between the VI40100CHM3/4W and a typical diode rectifier is the use of a patented, self-adjusting membrane technology, which improves the thermal performance of the device ten-fold compared to the traditional V-I40060CHM3/4W. The use of this membrane technology also allows very short recovery times, as the device is able to recover rapidly after being subjected to high initial currents. The device also has much better efficiency than other rectifiers due to its low dynamic voltage drop and low forward voltage drop.

The VI40100CHM3/4W is a versatile and reliable rectifying device, suitable for a wide range of applications in the industrial, military and automotive fields. Its epitaxial construction and low forward voltage drop make it very efficient in the conversion of AC to DC, while its low reverse saturation current and short recovery times add to its savviness and robustness. In conclusion, it can be safely said that the VI40100CHM3/4W is a valuable addition to an engineer’s arsenal of rectifying components.

The specific data is subject to PDF, and the above content is for reference