VN03SP-E

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

VN03SP-E is a member of the PMIC (Power Management Integrated Circuit) family which includes power distribution switches, load drivers, and low-side switches. It is a highly integrated, single-output, low dropout (LDO) voltage regulator. VN03SP-E is used to step down voltage from an input voltage to a lower, regulated output voltage. It is capable of supplying up to 1A of current and can operate at an input voltage of 2.7-7V and an output voltage of 1.8-3.3 V.

The VN03SP-E also has several integrated protection features for protecting the device against over temperature, over voltage, and short circuit/over current conditions. It is also able to detect an output undervoltage condition, allowing the system to be safely reset in the event of a fault. Additionally, this device is designed to handle a wide range of temperatures, from -40C to +85C.

VN03SP-E is a single-output LDO which is suitable for automotive, portable, industrial, and light commercial applications. Its features make it well-suited for various applications including CPU core/memory power, microcontroller power, and power supplies for sensors, LCDs, LEDs, and other applications. It is also compliant with IEC60601, EN60601, and CB certification requirements.

The working principle of the VN03SP-E is relatively straightforward. It is provided with a positive input voltage (Vin) which is stepped down by the internal resistive voltage divider created by R1 and R2. This internal resistive voltage divider is composed of an external series resistor R1 and an internal resistor R2. R1 and R2 are predetermined and can be chosen from the available range of values. If the output voltage is inadequate, then the output impedance of the circuit has to be readjusted by changing the values of R1 and R2.

The output voltage of the VN03SP-E is also limited by an internal error amplifier. This error amplifier compares the output voltage to a fixed reference voltage and then amplifies the difference. This amplified signal is used to drive the gate of the internal P-Channel MOSFET, which acts like a switch between the input and the output of the device. When the MOSFET is \'on\', the output voltage is equal to the input voltage, and when the MOSFET is \'off\', the output voltage a few millivolts below the input voltage.

The VN03SP-E also has two other output pins, START and FAULT. The START pin is used to control the start-up of the device and can be pulled to ground to prevent the device from starting. The FAULT pin indicates if the device has encountered an overtemperature, overvoltage, or short circuit condition. This pin can also be used to initiate a system reset in the event that an output undervoltage condition has occurred.

In conclusion, VN03SP-E is a highly integrated and efficient LDO voltage regulator which is suitable for a wide range of applications. Its features make it well-suited for applications such as CPU cores, memory power and power supplies for sensors and LCDs. Its low dropout operation and integrated protections and monitoring make it an ideal solution for a variety of applications.

The specific data is subject to PDF, and the above content is for reference