VNH3SP30-E

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The VNH3SP30-E is an H-bridge power integrated circuit designed for brushed DC motors, as well as other inductive loads. It is categorized as a PMIC - Motor Driver, Controller, which is typically used in applications where high current is needed, such as robotics and automotive systems. This device can be used to drive DC motors with a wide range of voltage and current ratings.

The VNH3SP30-E is a three-phase H-bridge driver. It has two power MOSFETs per channel which can be either N-channel (logic level) or P-channel (CMOS level). The device has built-in dead time protection, allowing it to operate safely at high switching frequencies. It also has several other protection features, such as overcurrent protection and thermal shutdown.

One of the main advantages of using the VNH3SP30-E is its high efficiency. The MOSFETs used in this device have a low RDS on value, which means they can switch faster and with less power than other MOSFETs. This helps to minimize power losses and increases the efficiency of the motor control system.

The device has a wide input voltage range, from 6V to 36V. It can be used to drive DC motors with a wide range of voltage and current ratings, up to a maximum of 30A. Furthermore, thanks to its adjustable maximum duty cycle and current limit, it can be tailored to meet the specific requirements of any given application.

The working principle of the VNH3SP30-E is quite simple. The device\'s inputs dictate the direction of current flow through the H-bridge. If both of the inputs are at the same voltage, the circuit switches off, allowing the motor to coast. If one input is higher than the other, current will flow from the higher-voltage to the lower-voltage input, which will cause the motor to rotate in one direction. If one input is low and the other is high, the current will flow from high to low, which will cause the motor to rotate in the opposite direction.

The VNH3SP30-E can also be used for other purposes besides motor control. For instance, it can be used to control relays, actuators, and other types of inductive loads. It can also be used in robotic systems, as it allows for precise control over the movement of the robot.

In conclusion, the VNH3SP30-E is an efficient H-bridge power integrated circuitdesigned for brushed DC motors, as well as other inductive loads. It is characterized by its wide input voltage range, high efficiency, and adjustable maximum duty cycle and current limit. Furthermore, it is versatile and can be used for a variety of purposes besides motor control.

The specific data is subject to PDF, and the above content is for reference