Allicdata Part #: | VNV14N04-ND |
Manufacturer Part#: |
VNV14N04 |
Price: | $ 0.00 |
Product Category: | Integrated Circuits (ICs) |
Manufacturer: | STMicroelectronics |
Short Description: | MOSFET POWER AUTOPROT POWERSO10 |
More Detail: | N/A |
DataSheet: | VNV14N04 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Voltage - Supply (Vcc/Vdd): | Not Required |
Base Part Number: | VN*14N |
Supplier Device Package: | 10-PowerSO |
Package / Case: | PowerSO-10 Exposed Bottom Pad |
Operating Temperature: | -- |
Fault Protection: | Current Limiting (Fixed), Over Temperature, Over Voltage |
Features: | -- |
Input Type: | Non-Inverting |
Rds On (Typ): | 70 mOhm (Max) |
Current - Output (Max): | 10A |
Series: | OMNIFET™, VIPower™ |
Voltage - Load: | 35V (Max) |
Interface: | On/Off |
Output Type: | N-Channel |
Output Configuration: | Low Side |
Ratio - Input:Output: | 1:1 |
Number of Outputs: | 1 |
Switch Type: | General Purpose |
Part Status: | Obsolete |
Packaging: | Tube |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
VNV14N04 is a power distribution switch, load driver designed by Vishay Intertechnology. It is used for increasing the current capacity of a given load to drive high-current loads in an efficient and reliable manner. The device can be used in applications that require low on-resistance, high-side load switching, and load current up to 1A. It has a wide range of features, including low on-resistance, over-temperature protection, built-in load current scaling, simple side control, enable and disable pins which make it an ideal choice for applications in a variety of industrial, automotive, medical, and consumer electronics systems.
Working Principle of VNV14N04
The VNV14N04 power distribution switch, load driver is designed to provide a low-on-resistance, high-side switching application at 1A load current. It is a monolithic integrated circuit consisting of two MOSFET devices arranged in a half-bridge configuration. The half-bridge is used to enable or disable the load circuits. The enable and disable pins are used to control the half-bridge and, thus, enable and disable the load current. The enable/disable pin is pulled to ground to enable the load, and pulled to VCC to disable it.
The device also has an over-temperature protection (OTP) function which monitors the device temperature and shuts off the power switch when the temperature reaches a certain limit. The OTP is triggered when the device temperature reaches a temperature higher than 140°C. Additionally, a built-in load current scaling feature allows the user to adjust the current limit of the device to prevent from over-current faults. The user can adjust the current limit to 0.5A or 1A with the help of a p-mosfet.
Applications of VNV14N04
The VNV 14N04 power distribution switch, load driver is ideal for a wide range of applications in consumer electronics, industrial, automotive, and medical systems. It is suitable for use in applications such as load current control, load management, automotive circuit protection, over-temperature protection, and power management. It can be used in any system that requires a reliable, low-on-resistance power switch that can handle up to 1A load current.
One of the many applications of the VNV14N04 is in power management. This power distribution switch can be used to control the flow of power from a primary source to multiple secondary sources. This is especially useful in applications where multiple power sources are required, such as in systems that require continuous power supply. By using the VNV14N04, the flow of power can be managed and monitored to prevent over current faults. The low on-resistance of the device also helps in reducing power losses.
The VNV 14N04 can also be used in applications such as load current control and load management. By adjusting the current limit of the device, the user can control the current drawn by a given load. This helps in reducing energy wastage by preventing the system from drawing more current than necessary. Moreover, the device can also control the current distribution among multiple loads, which helps in improving the efficiency of the system.
Finally, the VNV14N04 power distribution switch is also suitable for applications that require over-temperature protection. The device comes equipped with an over-temperature protection feature that automatically shuts off the power switch when the temperature rises above 140°C. This helps in protecting the system from potential damage due to excessive heat, which can be caused by prolonged use or by faulty components.
Conclusion
The Vishay Intertechnology VNV14N04 is a power distribution switch, load driver which is designed to provide low on-resistance, high-side switching and load current up to 1A. It is suitable for a wide range of applications, including power management, load current control,load management, automotive circuit protection, and over-temperature protection. The device has several features such as low on-resistance, over-temperature protection, built-in load current scaling, simple side control, enable and disable pins, which make it an ideal choice for applications that require reliable power reduction.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
VNV10N07-E | STMicroelect... | 0.81 $ | 1000 | IC MOSFET OMNIFET 70V POW... |
VNV10N07 | STMicroelect... | 0.0 $ | 1000 | MOSFET POWER AUTOPROT POW... |
VNV14N04 | STMicroelect... | 0.0 $ | 1000 | MOSFET POWER AUTOPROT POW... |
VNV10N0713TR | STMicroelect... | 0.0 $ | 1000 | MOSFET OMNIFET 70V 10A PO... |
VNV14N04-E | STMicroelect... | 0.0 $ | 1000 | IC PWR MOSFET M0 42V 14A ... |
EXPRESS CARD PWR SWITCH
PSC LOAD SWITCH V-DFN3030-10
IC DARL DRIVER ARRAY 4CH
IC USB POWER SWITCH 8MSOP
IC SW IPS 1CH HIGH SIDE D2PAK-5
IC SW IPS 1CH HIGH SIDE 8SOIC