VQ1001P-2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The VQ1001P-2 is an array of CMOS enhancement mode Field Effect Transistors (FET). The VQ1001P-2 array is primarily used in electronics circuits to build low voltage and low power switched logic circuits, where exact timing of turning on and off of signals is key. The array consists of 14 individual FETs, all connected to a single gate control line. The FETs are of the N-type shaped structure, and the source, drain and gate on each transistor can be accessed separately.

The basic operation of the FET is that the gate voltage determines the current flow between the source and drain. When the gate voltage is high, the FET is turned on, meaning current is able to flow from the source to the drain. When the gate voltage is low, the FET is turned off and no current flows from the source to the drain. This versatile approach allows for both switching and amplification of signals.

The VQ1001P-2 array uses the basic FET operation to allow for multiple connections to the same gate voltage. Since the same gate voltage is used for each FET, the logic elements in the array can be easily combined to form logic gates, multiplexers and Arithmetic Logic Units (ALUs). The logic elements can also be used as an Input/Output (I/O) multiplexer to maximize the use of limited I/O ports in an application.

The VQ1001P-2 array has a variety of applications, such as in power switching, signal routing and logic circuit design. In power switching, the VQ1001P-2 can be used to build power supply for logic circuits, and to switch power to the appropriate controller. In signal routing, the VQ1001P-2 can be used to route signals from one circuit to another. It can also be used in logic circuit designs to develop custom logic circuits with a simple interface.

The VQ1001P-2 array is a versatile device which provides a cost effective and flexible solution for many different application requirements. It is well suited for low voltage and low power circuits, as the FETs used have a low threshold voltage and a low leakage current. The array also provides a simple and easy to use interface, making it ideal for applications where exact timing is important. Overall the VQ1001P-2 array is a highly capable and cost effective solution for many applications.

The specific data is subject to PDF, and the above content is for reference